Metabo TKHS 315M 300mm Site Saw 110 Volt

The Faithfull FAIPLANE912 is a 9.1/2 Block plane seated at 21º with a 42mm cutter width. The planes are designed for end grain work or in any situation where a single handed operation is required. The low angle cutter and fully adjustable mouth from wide for coarse work to narrow for the fine shaving of awkward grain, make these planes ideal for all types of end grain work. Presented in a hinged wooden box. Cutter Width: 42mm.Overall Length: 160mm.

These Forgefix high-low thread Concrete Frame Screws are Zinc Yellow Passivated for increased resistance to corrosion. They offer a virtually stress free fixing, allowing close to edge applications. They are through-fixing, eliminating the need for marking and re-positioning when fixing batons etc. The Torx compatible head of the screw enables increased torque control. APPLICATION: Extremely popular fixing for window and door frames. Also now used as a versatile fixing for many applications in DIY, Joinery, Plumbing and Electrical trades. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. By design, Torx compatible head screws resist cam-out much better than Phillips or Slotted screws. Where Phillips heads were designed to cause the driver to cam out, to prevent over-tightening, Torx compatible heads were designed to prevent it and to achieve a desired torque consistently. Torx compatible head sizes are described using the capital letter 'T', followed by a number. A smaller number corresponds to a smaller point-to-point dimension of the screw head. Only the proper driver can drive a specific head size without risk of ruining the driver or screw. High-Low Thread screws have an excellent holding power in wood due to their alternating high and low thread heights.Concrete Frame Screw Torx High-Low Thread ZYP 7.5 x 122mm Bag 10

These Forgefix Hinged Screw Cover Caps, sometimes known as 'Fold Over Cover Caps', are extremely versatile and will suit most types of screw heads. APPLICATION:Offer a concealed yet aesthetically pleasing finish where screws would normally be bare to the elements or the eye.Used for many sign and sanitary installations as well as cupboard and carcass assembly.Hinged Cover Cap Grey No.6-8 Bag 100

The Bostitch Standard Male Hose Connector for use with Stanley Bostitch range of Compressors. CEJN 320 Series with 1/4in B.S.P. fitting.

Steel cut spiral bevel gears provide the highest level of durability and low vibration, increasing user productivity whilst a low profile, jam pot gear case improves gear durability and ergonomics.With an intelligent trigger design and slide in 4.0Ah Li-ion batteries, this models will make the perfect new addition to your toolbox.

The Bosch S1543HM Blades are part of the "Endurance for Brick" range.  - Carbide Technology - For Small Bricks (up to a material thickness of 150mm) Specification: Total Length : 240mm Tooth Spacing : 12.7mm / 2TPI