Premier Trophy MX Chromed, cross helmet

Specification:Handle Material: AlloyWrench Shaft Length : Approx. 14.6cm/ 5.7Chain Total Length: Approx. 44.5cm/ 17.5Max Usable Chain Length: Approx. 38.5cmFitment:For removing all oil filters up to 12cm diameterHow To Use:The chain is simply located around the filter and turned the chain will tighten to the diameter of the filterPackage Included:1 X Oil Filter Wrench

Specification:Condition: Brand New!!Model Number: B45728Product Name: Rear View Reverse CameraMaterial: ABS Plastic+MetalMain Color: BlackSize: 78*33*35mmVideo Cable Length: Approx.6MPower Cable Length: Approx.1.5MLens Angle: 170Resolution: 520 TV LinesTV System: NTSCWater-proof: IP67Resolution: 648*480Power: 5WPower Supply Voltage: DC12VSeismic Strength: StrongDisplay: Ntsc/PalImage Sensor: PC7070K UpgradeQuantity: 1setFitment:For VW Tiguan 2008 - 2014For VW Golf Mk4 Estate Variant Only | 1999 - 2006For VW Bora 1998 - 2005For VW Polo 2005 - 2009For VW Passat 1996 - 2005For VW Jetta 2005 - 2010For Porsche Cayenne 2004 - 2010For Skoda Fabia 2000 - 2014For Skoda Yeti( Please Compare With Your Original One Before Purchasing!)Features:-Water Resistant,Dust Proof,Shockproof.-Wide Angle View,High Definition,Night Vision.-Easy To Install.Package Includes:1 x RearView Colour Camera1 x 6m Video Cable1 x 1.5m Power Cable1 x User Manual

Specification:Product Name: 3 GAL Air Horn Tank Compressor KitCondition: NewPackage Size: 60cm x 35cm x 25cm (LxWxH)Quantity: 1 setAir Compressor:Color: SilverMaterial: MetalSize: 24cm x 16cm (LxH)Voltage: 12VAmperage Draw: 23APlacement On Vehicle: Front,Left, Right200 PSI Air Compressor12V Permanent Magnetic MotorMaximum Working Pressure: 200 PSIWorking Pressure: 150 PSIFlow Rate: 1.7CFM @ 0 PSI4-Trumpet Air Horn:Color: BlackMaterial: MetalDecibel: 149DBVoltage: 12VPlacement on vehicle: Front,Left,RightTrumpet Size: 15cm x 34cm (LxH)Air Tank:Color: Black3 Gallon Air Tank KitCapacity: 3 Gallon (12 Liter)Maximum Working Pressure: 200 PSIWorking Pressure: 150 PSITotal Ports: 7Size: 55cm x 23cm (LxH)Features:1.Anti-Corrosion Coating,Precision Welded.2.This on-board system is designed for use with any high-pressure air horn that requires an on-board air system.3.Comes with a 3 Gallon air tank with 7 ports, a 200 PSI heavy duty compressor, pressure gauge, pressure switch, fuse, hose, fittings, thread sealant and mounting hardware.4.Oil-less design,moisture and Dust Resistant.5.Automatic reset thermal overload protector,mounting plates with vibration isolators.Fitment:Fit for all vehicles with a 12V system.Package Included:1 x Air Tank1 x Air Pressure Gauge1 x Pressure Switch1 x Safety Valve1 x Wing Style Drain Valve5 x Hex Head Male Plug1 x OD Nylon Plastic Hose1 x Fuse1 x Thread Sealant Tape1 x Rubber Ring4 x Screws(Big)4 x Screws (Small)2 x Screws (Minimum)4 x Nut (Big)4 x Nut (

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

* Spare peak * Fits the FOX V1 REVN Helmet * Easily changeable due to magnetic system MVRS | Article: FOX V1 REVN Helmet Peak, yellow, Size M | Article: FOX V1 REVN Helmet Peak, yellow, Size M, yellow, Size M

Outer shell
750 D Tactel material from DuPont Contains non-textile parts of animal origin
Lining
mesh lining (100% polyester)
Membrane
detachable waterproof, windproof and breathable HUMAX Z-liner® inner (100% polyester with 100% polyurethane coating)
Fit/features
3 external pockets air-vent zippers large stretch panels in the thigh, knee and calves for a perfect fit waist belt elasticated waist PITTARDS® leather anti-slip seat patch
Protection
optional hip protectors EN 1621-1 CE-approved height-adjustable SAS-TEC® 3D knee protectors reflective sections Connecting zip