Description:Eagle claw style fixing, universal fit It can be fixed on handlebar or rearview mirrorFour sides keep the phone or GPS more steadyIt is USB rechargeable, easytooperate,convenienttoinstallorremoveMechanical spring telescopic design can tightly lock telescopic positionExcellent design, with360 degree rotatingmount for easy angle adjustmentIt comes withanti-vibration pads and is moreconvenience when you usephones or GPS duringridingSpecification:Material: ABSColor: BlackCurrent: 2.1AInput Voltage: 12-24VWire Length: About 1.5mInstallation Instruction:Red wire is connected to the power +, black line is connected to the power -Package Included:1 X Phone GPS Holder1 X Parts
Specification:Color: BrownNo. of Cylinders: 1 CylinderDisplacement (ml): 50 150ccItem Type: EnginesModel Name: Valve Stem Oil SealFitment: Fits GY6 50-150cc Scooter Moped 139QMB, 152QMI 157QMJ etcNote:1. Please check the size if it matches your models before you purchase2. Pls allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)3. Instruction is not included,professional installation is highly recommended.Package Included:1 X Pair Valve Seal
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric. Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor. The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part. Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER: Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. Removeable Nose Protector Ventilation The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation. Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
Features Multi-density EPS Reinforced chinstrap Shell sizes LS2 offers multiple case sizes, custom-sized EPS protective films and our high-performance, high-quality comfort filler as well as 3D laser-cut plastic foam for a perfect fit and comfort throughout the day Made of HPTT In the HPTT process, which was developed exclusively by our technicians, an ABS mixture is injected into molds. The molds used in this high-precision process are made of metal blocks weighing several hundred kilograms Two positions sun visor Like all LS2 helmets, the Spitfire has a sun visor that protects the rider from radiation on sunny days. It can be replaced by other sun visors in different colors and placed in two different positions. Perfect grip and reliability on the way Quick release The metal buckle combines with a high-quality chin strap with a plastic tongue with teeth. When closing you hear a soft "click". As far as locking until you reach a comfortable but tight seat. Pull the ribbon to unlock the tongue. Further adjustment options are provided by the chinstrap on the side of the metal buckle Detailed design Highly detailed and elegant embossing on the back of the helmet Feed ventilation The new LS2 liners are extremely air-permeable and, together with the flow channels in the EPS cushioning, always provide a fresh feeling Laser-cut upholstery Foam with different densities is laser-cut in 3D and adapts perfectly to the driver s head shape
Feature:Easily grabbed for changing gears and improves the style of your vehicle.Direct replacement of the original knob, no modification needed so long as thread size matches.Instruction manual is not included.Installation:Step1: Remove the original factory gear knob from shifter.Step2: Place the new knob over the shifter and fasten the correct nut.Step3: Make sure the knob is firmly attached.Specification:Material: Laser cut acrylic plasticColor: Red+white/ blue+purpleLength: 15cmAdapter size: M8x23mm M10x23mmFitment: Universal fit for most vehiclesPackage Included:1 X Shift Knob2 X Threaded Adapter
Feature:2PC Red Loud Compact Electric Blast Super Tone Hella Horn for CAR/TRUCK 12V D4G1.This is for a set of two (2)horns for 12V systems.These horns use a standard blade connector on the back.Rated at 118dB, these horns are nearly 7X LOUDER than a stock horn (@ 96dB)Each horn has a diameter of 123mm (4.8).Ideal for all types of vehicles.Feature of disc-style horn.High volume.Specification:Material: MetalVoltage: 12VCurrent: 4APower Consumption: 2 x 66WLoudness: 105~118dBFrequency(High Tone): 40020HZ(High)Frequency (Low Tone): 33520HZ(Low)Fitment: Universal for motorcycles, cars, trucks, etcDiameter: 123mm (4.8)Color: Black, blue, green, silver, redPackage Included:2 X Horn1 X Relay