Free
Support
The ADJ Mega QA Go is a compact, low profile battery powered LED Par designed for uplighting and stage lighting, and will bring color and excitement to any party. This fixture features an unique ?sit-flat? design so that it may sit directly on the ground or inside truss without the scissor yoke because the power & DMX ins and outs are mounted on the side of the fixture, not on the rear. The Mega QA Go features 5 x 4-Watt, 4-IN-1 RGBA LEDs which offers smooth Color Mixing, has a 40-degree beam angle, 5 operational modes (including DMX, Sound Active Mode, RGBA Dimmer Mode, Auto Run Mode, & Static Color Mode), and has 8 DMX Channel modes for a variety of programming options. Users can also use the Airstream IR App or ADJ UC IR wireless remote, which is sold separately, to control the Mega QA Go. Technische Daten Rechargeable Lithium battery life: 4 hours full on (with a full charge); 5.5 Hours in Energy Saving Mode (with full charge, 4 hours charge time Stand Alone or Master/Slave Configuration Beam Angle: 40 degrees 64 built-in Color Macros DMX-512 protocol Color strobe effect Great as an architectural wall wash or for performance stages where traditional stage lighting emit a lot of heat onto performers Compatible with UC IR wireless remote (sold separately) & Airstream IR app Linkable via 3-pin XLR cable Electronic Dimming: 0-100% Flicker Free Includes a scissor yoke to hang on truss, mount on a wall or set on the ground Ultra bright slim flat black Par with 5 x 4-Watt, 4-IN-1 Quad RGBA LEDs (rated at 50,000 hrs.) Smooth color mixing (fast or slow color change operation) Unique ?sit-flat? design: Power & DMX Ins/Outs intelligently designed so the unit can be set flat on the ground or set inside truss Rechargeable Lithium battery built-in to fixture 8 DMX Channel modes: 1, 2, 3, 4, 5, 6, 7 or 8 channel modes 5 Operational modes: Auto Run Mode (16 Color Change Mode, 16 Color Fade Modes, & 1 Combined Mode), Sound Active Mode (16 Modes), RGBA Dimmer Mode, Static Color Mode (64 Colors), and DMX Controlled Digital DMX Display with 4-button menu for easy navigation Power Draw: 28W Max IEC AC input and out put on the side of the fixture to daisy chain the power cords (link up to 20 fixtures) Multi-voltage operation: AC 100V-240V 50/60Hz Dimensions (LxWxH): 5.5\"x 9\" x 10\"/ 253 x 227 x 140mm Weight: 4 lbs./ 1.9 kg.
Features: Abstract sculpture, elegant and fashionable. 3D printing primary color. Minimalist style, modern and stylish. Suitable for all kinds of interior decoration: living room, study, bedroom, etc.
ACHTUNG: Bei diesem Artikel handelt es sich um B-Ware bzw. Vorführware in Top-Zustand! Aktive 12\"/1\" Lautsprecherbox im Multifunktionsgehäuse. Durch die besondere Bauweise eignet sich die Box neben dem Einsatz als Front-PA mit reichlich Gehäusevolumen auch als durchsetzungsstarker Bühnenmonitor. Technische Daten Einsatz als Topteil oder Monitor Hohe Endstufen-Power 1.200 W Class D bi-amped Ausgeglichener, hochauflösender Sound Hoher Schalldruck von 135 dB SPL für die Beschallung von bis zu 500 Personen (mit passenden Subwoofern L SUB 1500 A oder L SUB 1800 A) Fortschrittliche DSP-Technologie für Hi-End-Sound-Ergebnisse auch ohne PA-Spezialisten-Kenntnisse \"Intelligent Multiband Limiter\" für gleichbleibende Klangcharakteristik, egal bei welcher Lautstärke FIR-Trennung für transparente Mitten Vier verschiedene EQ-Presets \"Bass Boost\", \"Flat (LF)\", \"Flat (HMF)\", \"Contour\" für flexible Anwendungen Geringer Klirrfaktor und somit keine Ermüdungserscheinung beim Hören Einfache akustische Kontrolle des Systems auch von der Bühne aus Akkurate Ausrichtung der PA, wodurch Reflexionen an Wänden und Decken reduziert werden Max SPL peak 135 dB Halfspace (@ 10% THD) Frequenzgang +/- 3 dB 67 Hz - 18 kHz Frequenzgang -10 dB 62 Hz - 18 kHz Gesamtleistung 1200 W Endstufen Class D - Biamped Aktive Schutzschaltungen Undervoltage-, Thermo-, Short-Circuit-, Overcurrent-Protection, Subsonic Filter, Peak-, RMS-, Multiband-Limiter, Look Ahead Temperature Control Tief/Mitteltonlautsprecher 1x 12\" Hochtontreiber 1\" Horncharakteristik 90° x 55° CD-Horn Trennfrequenz aktiv 2,3 kHz Anschlüsse 2x XLR/Klinke-Kombi In symm., 1x Stereo Cinch In, 2x XLR Thru symm., 1x XLR-Mix Out Eingangsempfindlichkeit +4 dBu @ Gain Centerclick Sensitivity-Schalter Line/Mic Input A Klangregelung 2x EQ-Schalter: Bass Boost/Flat und Flat/Contour Aufstellwinkel 33° Hochständerflansch HK Audio DuoTilt 3/7 Flugpunkte 4x M8 Griffe 1x HK Audio MultiGrip, 1x Standard versenkt im Deckel Gehäuse 16 mm MDF Frontgitter 2mm Metallgitter mit schwarzem Akustikschaumstoff Oberfläche Acryllack, schwarz Optionales Zubehör Schutzhülle, Stereo Pole Add-on M20, Speaker Stand Add-on, Anschlagspunkt (AP-8), Tilt-Unit Abmessungen (BxHxT) 39,5 x 66 x 34 Gewicht 20,6 kg / 45,5 lbs
ACHTUNG: Bei diesem Artikel handelt es sich um B-Ware bzw. Vorführware in Top-Zustand! Das Smart Base Single ist das am flexibelsten erweiterbare System und damit die perfekte Lösung für Beschallungen von Clubs bis zu mittleren Open-Air-Anwendungen. Für Anwendungen bei denen mehr Bass gebraucht wird, kann das System mit einem passiven Bass E 110 SUB und/oder dem aktiven L Sub 1500 A aus der Linear Serie erweitert werden. Der 1200 Watt starke 15\"-Subwoofer ist dann die erste Wahl, wenn für DJ-Anwendungen oder Open-Air-Anwendungen druckvoller Tiefbass verlangt wird. Wird ein noch weit reichender Mittel-/Hochton Bereich gebraucht, kann statt der signalführenden Stange ein zweites E 835 eingesetzt werden. Technische Daten Elegantes Design Skalierbar und flexibel erweiterbar Nahezu kabellos Leicht und kompakt Maximalausbau bis 2.400 Watt E 835 Belastbarkeit nominal (RMS) 300 W Nennimpedanz 8 Ohm Empfindlichkeit 1W/1m 100 dB (half space) Frequenzgang -10 dB 140 Hz - 20 kHz, über aktiven Systemfilter Lautsprecher 8 x 3,5\"-Breitbandlautsprecher Directivity 70° horizontal Trennfrequenz Passivweiche 140 Hz, 12 dB/Okt Anschlüsse 1 x E-Connect-In 1 x E-Connect-Out 1 x E-Connect-Out Abmessungen (BxHxT) 11 x 74,5 x 12 cm (exkl. E-Connect- Stutzen) Gewicht 4,5 kg E 110 Sub AS Headline System-Subwoofer Frequenzgang -10 dB 45 Hz - 150 Hz (Messung bei aktiver Trennung) Gesamtleistung 1200 W Endstufen Class D Aktive Schutzschaltungen RMS-Limiter Subsonic-Filter DC-Schutz Impedanzschutz Thermo-Schutz (Temp. gesteuerter Lüfter) Basslautsprecher 1x 10\" (2\"-Schwingspule) Anschlüsse 1 x XLR-Kombi-In, 1 x XLR-Through, 2 x Speakon-Out (1 x Sub + 1 x Mid-High), 2 x E-Connect-Out Eingangsempfindlichkeit (schaltbar) +4 dBu / -10 dBu Hochständerflansch 2x Flansch (E-Connect) Abmessungen (BxHxT) 30 x 48 x 46 cm Gewicht 18,5 kg
es503 - das neue entertainment system von dBTechnologies Das neue ES503 ist ein aktives Stereo-Komplett-System mit sehr umfangreicher Ausstattung, extrem kompakten Maßen und Gewicht sowie hochwertiger Wiedergabeeigenschaften. Dank des ausgeklügelten Designs ist es sogar skalierter und in drei verschiedenen Variationen nutzbar. Also Mono-System. Als Stereo-System und für anspruchsvollere Anwendungen mit zwei Mono-Systemen als leistungsfähige Stereo-PA. Besonderes Feature ist ebenfalls die umfangreiche Input-Sektion mit 3 Combo-Inputs und einem integrierten Bluetooth-Receiver für direktes Audiostreaming. Technische Daten Speaker Type 3-amped Stereo System with two full-range tops and one subwoofer Akustische Daten Frequency Response [-10dB] 37 - 15.000 Hz Max SPL 121 dB MF-HF 8x 3\" MF-HF Type Neodymium LF 12\" Directivity 95x65° Amplifier Amp Technology Digipro® G3 Amp Class Class-D Power Amp 1000 W Controls 1x OLED Display with rotary encoder w/switch 1x Audio signal monitoring LED 1x USB port (service data) Power Supply SMPS with PSU Auto-range Power Connection VDE socket Cooling Convection Processor Controller DSP 24 Bit/48 kHz System Presets Factory presets + User defined Limiter Dual Active, Peak, RMS, Thermal Crossover Frequency LF-MF 206 Hz Eingang Mic/Instrument Channel 1x Combo (XLR/Jack) balanced/unbalanced input Line Channels 2x Combo (XLR/Jack) balanced/unbalanced inputs Media Channel 1x Bluetooth® built-in receiver Mix Output 1x XLR balanced output Mechanik Housing (Subwoofer) 15mm Black Painted Birch Plywood Housing (Tops) Polypropylene PP Handles 2x lateral side (Subwoofer) Dimensions WxHxD (Tops) 95x360x137 mm - 3.74x13.98x5.39 in Dimensions WxHxD (Subwoofer) 465x400x430 mm - 18.3x15.7x16.9 in Weight (1 Top) 1.9Kg - 4.19lbs. Weight (Subwoofer) 16.4Kg - 36.16lbs. Zubehör (optional - nicht im Lieferumfang enthalten) SK-25 TT Stativset DT-50 Transport Trolley
4pcs RC coche multifunción redondo LED luz con pantalla para 1/10 RC coche de oruga HSP REDCAT Axial SCX10 Traxxas TRX-4