The Facom Jet.C4M3 Jet3 4 drawer cabinet is a rugged, highly durable storage cabinet. It has three 60mm high drawers and one 130mm high drawer. 3 x 60mm high drawers (holds max. 9 modules). 1 x 130mm high drawer (holds max. 3 modules). Total load acceptable in the drawers: 85kg. Useful storage volume: 75 litres. Weight: 45kg.Overall Size: 48 x 77.4 x 54.6cm.
The Knipex 7 Way Cabinet Control Key is suitable for control cabinets and shut-off systems in the supply of gas, water and electricity, e.g. air conditioning, ventilation systems, shut-off valves, mains switch-boards, etc. Supplied with a securing chain. It has the following functions: 3 x Square: 5, 6 & 8mm.1 x Triangular: 9mm. 1 x Two-Way: 3-5mm.1 x Double Ended Bit (Slotted 1.0x7mm and PH2).1 x 1/4in Bit Adaptor.
SB-3732 series nail punches are manufactured with a plastic handle and fully polished steel surface with a brilliant chrome finish.Tip size: 2.0 mm (5/64in). Length: 125 mm (5in).
The Master Lock Excell™ Laminated Steel Padlocks are made with cutting edge technology to deliver unprecedented security. They feature tough cut patented octagonal boron carbide shackles which are 50% tougher to cut than hardened steel, and dual ball bearing locking mechanisms for maximum pry resistance. The laminated steel padlocks are built for strength, with stainless steel and zinc outer components for exceptional weather resistance. They have either a precision 4-pin or 5-pin cylinder and recessed rivets that are chisel resistant. Supplied with 4 keys and a Lifetime Warranty against mechanical failure. Suggested uses: gates, sheds, storage units, fences, containers and chains.The Master Lock M1EURT has the following specifications: 2 x 45mm Excell™ laminated steel padlocks - Octagonal boron carbide shackle, 8mm diameter - 4-pin tumbler cylinder - dual ball bearing locking - keyed alike
Number of drilling modes: Three. Hammer drill, rotary drill, hammer only. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling. The HR3210C features the unique Makita AVT Anti Vibration Technology design employing the pneumatic pressure created in the drills hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration Forward/reverse rotationVariable speed triggerTorque limiter3 functionRotary onlyRotary hammerHammer onlyDouble insulated Blows per Minute: 1,650-3,300bpmNo Load Speed: 315-630rpmInput Wattage: 850wMax Bit Diameter: 32mmMax Core Diameter: 90mmImpact Energy: HR310C: 5.6 JoulesHR3210FCT: 6.4 JoulesWeight:HR310C: 5.2kgHR3210FCT: 5.4kg Chuck type: SDS plusVibration drilling : 2.5 m/sec²Vibration hammer drilling: 10 m/sec²Vibration chiselling: 7 m/sec²Vibration K factor: 1.5 m/sec² Supplied with: Side handle, depth stop, bit grease, carry case. HR3210 FCT also supplied with Quick Change Chuck.
These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 125mm (5 in). Blade length (B): 16mm (0.63 in). Head width (C): 16mm (0.63 in). Head depth (D): 8mm (0.31 in). Tip width: (F): 1.6mm (0.06 in). Cutting capacity: 0.4-2.0mm. Cutting edge: Micro-bevel. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.
