Floor Drain Faucet accessory Odorless Superior Quality Others Contemporary Stainless Steel Electroplated 100mm100mm Lightinthebox

The ALM Manufacturing FL247 Shredding Lines are suitable for: Flymo: Garden Vac, Garden Vac Plus, 1500/1600/1600X/1800/2200/2500, Turbo, 750 Plus, MEV750-2. Compares to FLY024. Pack of 5.

Hammerite "Direct to Rust" Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3-in-1 formula, there is no need to use a primer or undercoat...saving you precious time! It forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion-resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Two coats are required and protects up to 8 years. Specification: Colour : Cream Finish : Smooth Size : 750ml Coverage : 5m²/L

Apertura Ware reloj inferior cubierta abridor reloj tapa reloj reparación del reloj herramientas 3 herramienta abierta de la mandíbula

The Faithfull PDRAUG25 is an easy to use drum auger that is designed to remove blockages from household pipes and drains when plungers and chemicals fail to work. The auger utilises a 7.6m/25ft x 6mm/1/4in flexible spring steel shaft with a barrel end that can be rotated to clear away blockages and is easily retracted into its case after use for safe storage. The auger has a sturdy plastic body manufactured from PE and ABS wipe clean plastic and features both an integral winding and pistol grip handle that help make the auger easy to use. Once fully retracted the spring steel shaft can be locked in place using the locking thumb screw. No chemicals are required to help remove the blockage, making this a safe and environmentally friendly product.

Faithfull Centre punch with a square head which provides a larger striking area and prevents the punch rolling when laid on the bench. Carefully hardened and tempered and with a 90° ground point.Point Diameter: 6.4mm (1/4 in)Length: 100mm (4 in)

Monument Tap Reseating Tool 1/2 inch re-cuts the seats of worn taps or stopcocks without disconnection from the pipework.Tapered cones screw into the top of the tap body, provided the tap body is threaded to the top. For taps with recessed threads in the body, use the parallel bush series. Cutters are case hardened. The feedscrew allows fine adjustment to the cutter. All parts are interchangeable. Fits old series 1/2 in BS1010 flat seats. Complete with 17 and 19mm (11/16 in and 3/4 in ) flat cutters and a tapered cone.