Free
Support
Dot pattern, princess style, lovely and elegant. Paint printing, super soft and comfortable, environmental protection, good warmth retention property, innovative design, modelling is lovely, practical, color, style can decorate more.
Style de vase:Contemporain; Matériels de vase:Plastique; Quantité:1 pc; Type:Vases et panier; Poids à l'expédition:0.1; date d'inscription:09/02/2021
Made of polyester material,waterproof, anti-mildew and safe.Ideally suits most standard sized bathrooms.Decorate with rainbow wood floor pattern make your bathroom full of vitality.Can stop splash water and offer an independent bath space.Attention:Please low temperature washing and ironing, do not bleach and dry clean.
Hose Mender 1/2in.The handy hose mender doubles as an extender for connecting two lengths of hose to create a longer run.Manufactured from high quality brass.Suitable for use with all 1/2in bore garden hoses and compatible with all other UK water fittings.
Silhouette:Trapèze; Ourlet / Traine:Longueur Sol; Détails au Dos:Fermeture; Décoration:Ruché; Tissu:Mousseline de soie; Décolleté:Col Arrondi; Marque:Lightinthebox; date d'inscription:01/02/2020; Buste:; Les hanches:; Creux au sol:; TOUR DE TAILLE:; taille de tableau date source:Mesuré par LightInTheBox.; Produits spéciaux sélectionnés:COD
The Forge Tubular Mortice Latch for internal doors can be used with any lever latch handle, lever on rose handle or door knob. Supplied with screws and fitting instructions.Fitting Instructions:1. Mark a height line on door face and edge as well as a centre line on door edge.2. Drill a Ø23mm hole into door edge to accept the latch body, and a Ø19mm hole in door face for the spindle bar measuring from the door edge (43mm for 65mm latch, 60mm for 80mm latch).3. Fit latch and use a pencil to mark around the faceplate. Chisel out so the faceplate lies flush with door edge.4. Transfer the height line onto the door frame and mark a vertical line at half the door thickness from the door stop.5. Drill a Ø16mm hole, 10mm deep at this point and square out with a chisel. Position the striking plate over this hole, mark around with a pencil and chisel out to lie flush.Case size: 65mm (2.5 inch). Backset size: 44.5mm. Forend finish: Nickel. Supplied with matching screws, face plate and strike.