Scott Denim Stretch Ladies Motorcycle Jeans, blue, Size 36 for Women, blue, Size 36 for Women

Chaser-X is the third Arai helmet that makes use of the new VAS (variable Axis System) technology that offers a significant larger and smoother shell area above the SNELL test line greatly improving the important helmet glancing off performance. The Chaser-X makes use of an also completely new ventilation system derived from the RX-7V, instantly recognizable by the large, single intake duct on top of the helmet. This Top Ventilation System is derived from the RX-7V diffuser system. The replaceable interior is lined with an anti-microbial fabric. The Chaser-X features FCS (Facial Contour System) and a fixed, non-retractable mini chin cover. The chin vent is also new, while the Formula One developed visor lock system is the same as used on the RX-7V. All Chaser-X helmets come with a standard Max Vision visor with a Pinlock inlay lens separately packed in the box. Chaser-X Ventilation: New system The Chaser-X features an exclusive ventilation system that is unique to this model. It is instantly recognizable by the large intake and exhaust duct on the front part of the helmet. The large inlet allows generous amounts of cool, fresh air to enter the helmet, assisted by the two inlets in the large single frame rear duct. The exhaust function of the large front duct keeps working when the intake is closed. The two small exhaust vents on the back of the helmet help to quickly dispose hot, warm air from the helmets interior. Shell Construction SFL Special Fibre Laminate Strict quality controlled construction using special fibre layers, crowded with fibres right to the shell surfaces and bonded with special resins formulated by Arai, to disperse impact energy over the widest possible area – the shell’s main job – through strength, structural integrity and impact flexibility. Variable Axis System (VAS) With VAS, the visor mounting position is lowered, yielding an average of an additional 24mm across both temple areas, in pursuit of the ideal smoother shape that increases the ability of glancing off energy. As a result, this has made it possible for more of the shell to be smoother along and above the test line of the Snell standard. Ventilation: Free Flow System (FFS) Creates airflow under the helmet that reduces wind noise and turbulence while increasing the exhaust of hot air. Front Ventilation: Center top vent The new Top Vent provides 11% more airflow than the previous Vent. The new bigger switch makes opening and closing easier. The new Top Vent has three positions, closed, half open and fully open to adjust the airflow and prevent water intrusion when fully closed. Front Ventilation: Standard brow vents Fresh air can enter directly to the forehead area without the need for holes in this critical area of the shell and impact absorbing liner. For specific models the ventilation is extended to the temple area. Front Ventilation: Three position chin vent Three-position chin vent helps in demisting the visor and offering fresh, cool air to the rider. Rear Ventilation: Neck exhaust vent To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet. Rear Ventilation: One-piece rear exhaust Extracts more hot air from the helmets interior and improves aerodynamics. Rear Ventilation: Side exhausts Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance. Aerodynamics: Fixed Chin Spoiler Helps minimize wind noise and also aids with the extraction of hot air from the face area. Provides additional deflection of road debris away from neck. Depending on the model the Chin Spoiler is retractable Visor: VAS Max Vision Visor with De-Mist option VAS MAX Vision shield is standard to provide better visibility in all seasons and for all types of riding. Comes standard with Clear anti-fog Pinlock insert to be installed as needed. Visor: New shield latch system Borrowed from our F1 helmet, completely modified 3D moving new shield latch mechanism secures the shield like never before, but operates smoothly with an intuitive fluid – one finger operation – even with gloves. Visor: Pinlock insert lens included Effectively prevents misting and fogging of the visor, even under extreme wet and damp conditions. May be cleaned and changed easily. Interior: Antimicrobial Liner New exclusive liner with antimicrobial stays fresher between cleanings. Interior: Replaceable Cheek pads/Ear cups Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Replaceable Interior Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Speaker pockets Build in communication systems are popular, but the problem is often that the room for a speaker is limited or just not present, causing unpleasant pressure points. The speaker pockets, offering room for mounting speakers without effecting comfort or fit. (Speaker not included). Interior: Facial Contour System (FCS) To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure. Interior: 5mm ’’Peel Away’’ Ear cups/Cheek pads Giving even more ability to craft the perfect fit and comfort, the cheek pads now feature a 5 mm peel away layer for added room if needed. Interior: Thin centre pad for more room in front area The result is more room around the nose and mouth area enhancing the famous Arai fit and comfort even more. Approval: ECE 22-05 The most common helmet certification internationally, required by over 50 countries worldwide. Five times inspected Each Arai helmet goes through five separate quality-control depart­ments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections. Washable interior The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water. Handmade It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours. All-day comfort All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai. Penetration tested All Arai helmets are penetration tested, although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet. Double-D ring device The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener. Smooth shape, better protection The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You don’t want to decelerate your helmet more than necessary. That’s why all Arai vents and ducts are designed to break off during an impact. Hard outer shell, soft inner shell Arai uses a very hard outer shell to spread impact forces and a soft inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component. Organic shape The organic shape of an Arai outer shell offers a more natural appearance, seals better and conforms more to the head’s natural shape for improved comfort, fit and to help minimize wind turbulence. 5-year limited warranty All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture. Different outer shells Unlike many other manufacturers Arai provides one size outer shell for each two-helmet sizes for most models. Together with different shaped outer shells for different models it is almost impossible not to find the fit you are looking for. Arai In-house test This Arai helmet is designed to meet the stringent Arai In-house standard requirements, in addition to mandatory standards such as ECE 22-05 and voluntary standards such as SNELL M2010.

Features
waist look long connection zipper racing style suitable for use in summer
Protection
knee sliders safe tech protection at knee, shoulder and elbow backprotector prepared

The Cobra is a sports jacket and a direct descendent of our top-of-the-range racing suits. Everything about this jacket - from the material and construction to the fit and safety features - is designed with performance in mind. Protection / Security
Main external material: full grained leather, 1.4mm as perour race suits. Furygan Skin Protect lining approved by Furygan’s R&D to reinforce leather products in terms of tearing and abrasion resistance. D3O homologated protectors for elbows, shoulders and back (1621-2 level 1 Central Back type homologated back protector fitted as standard), which offer full protection without restricting comfort and freedom of movement. External protection shells on the shoulders. Areas exposed to abrasion in a crash situation are reinforced with triple stitching to avoid tearing.
Ergonomics / Comfort
Sport fit Thermal padded lining with aluminium inserts on the chest for maximum protection against the cold. Racing sleeves with Kevlar stretch inside the arms. Leather stretch behind the shoulders, and the elbows. Neoprene inserts on collar and the wrists. Waterproof treated leather. Two connecting zips (one short and one full) mounted on an elastic belt. Four pockets (two inside, and two outside).

Do you want to save the rainwater during a rain storm or do you prefer to travel light and dry? Then the Macna Impact Pro offers a solution! Thanks to the revolutionary direct laminate membrane, the water is not trapped between the outer shell and the membrane, but it runs directly off the jacket. Raintex DL Conventional systems absorb rainwater. The water strikes through the non-waterproof outer layer of the jacket and is then blocked by the membrane. Water is trapped between these two layers, so your coat gets soaked and feels clammy. The remaining water forms a film on the membrane, which is at the expense of the breathability. The jacket is also heavy and it takes a long time before the coat is dried again. And what about the foul smell the next morning? Features
Made of Durylon and Soft flex DL Waterproof thanks to the Raintex Directlaminate membrane Removable thermal lining Extra visible on the sides thanks to Side Eye Vision Vest prepared Ventilation panels in chest and back, lockable with Aquastop Safe tech Protection on the shoulder and elbow backprotector prepared Comfix, collar closure that clicks like a printer but can be attracted as a strap Click Puller, never again a flapping zipper Hot Vest prepared so that you stay nice and warm during colder temperatures Coat Hanger Adjustable straps on the arm Long and short connection runs Back pocket for extra storage space Windcollar prepared (soft neck warmer that is easy to attach by means of a small zipper on the collar)
suitable for the Macna Windcollar Jacket size S / M = wind collars S Jacket size> L = wind collars M

prevents irritation post-shave soothes skin helps stop bleeding and disinfects minor cuts cools and refreshes skin

Features
Full-grain oiled leather upper DRYTEX® waterproof and breathable liner Adventure dual density anti-slip welt sole Special rigid nylon mid-sole with steel shank External injection-molded plastic protection Shin and ankle TPU protection Adjustable straps with Velcro closure Unbreakable aluminum buckles Extra soft polymer padding with memory foam Anti-bacterial replaceable insole Optional stainless steel toe caps (included) Suitable for men and women 100% European production