Brandit Us 1/2 Shirt, beige, Size 4XL, beige, Size 4XL

Richa s range of truely classic leather jackets is enormous. For example Daytona, Daytona 60 2, Detroit, Goodwood, Lincoln, Austin, Sturgis... The new Abingdon is equiped with sigificant details in arms and shoulders, has inside and outside pockets, a thermolining and has all around D3O protection included. The fit can only be described as excellent.

Specification:Product Name: Ignition Coil SticksMaterial: Plastic + RubberColor: BlackLength: 121.5mm/4.78inPart number: 5TA-82310-00-00Fitment: (Just for reference)For YFZ450 ATV 2004-2009For YFZ450 ATV 2011-2013For WR450F Motorcycle 2003-2009,2011For YZ450F Motorcycle2003-2009( Please make sure coil stick fit for your vehicle before purchase.)Note:1.The actual item maybe has slight color distinct with listing image due to different computer screens ,thanks for your understanding.2.The size of item is manual measurement,please allow 0.5-1inch difference.(1inch=2.54cm)3.Instruction is not included,professional installation is highly recommended.Package Included:1 X Ignition Coil Stick

Home Soft Long Johns

Specification:Model Name: D81826Product Name: Trailer Boat Turn Tail LightsMaterial: PlasticColor: RedSize: 210mmx73mmx75mm(LxWxH)Rated voltage: 12VPower: 0.2x16WColor temperature: 6000KWaterproof: IP68LED Type: Left: 48 LED Right: 39 LEDPlacement on vehicle: Left, Rear, Left, RightPosition: Stop Turn Tail Marker Clearance Light LampQuantity: One pair (LeftRight)Manufacturer Part Number: HL-H-005LEDs in the light:Left light:Front: 12+4 red LED，central：18， side: 5 red LED，bottom: 9 white LED ( as license plate light)Right light:Front: 12+4 red LED，central：18 Led，side: 5 red LEDFeatures:-100% Brand new with good performance.-Both lights serve 6 functions: stop, turn, tail, rear reflector, side marker, and side reflector.-Free to use in heavy rain keep your vehicle well-marked and safety ensured.-It totally meet international IP68 standard, making it suitable to be used on trailers transporting boats, jet skis, or in various other applications where the lights are expected to be exposed to water.(Please check all wire connections before submersing under water for safety)-Our led trailer lights are 100% compliant with DOT FMVSS108 international standards.This ensures that our led tail light are meets requirements for visibility, durability, and reliability and it can guarantees safety when you are in driving.Fitment:(Just For Reference)Universal for trunks,trailers,tractors,semi-trailer,dump trailer,bus,utility boat,RV,camper,cargo,special vehicle,etc.For under and over 80" inc

* Light textile inner lining * Palm made from abrasion-resistant goatskin * Padding on the ball of the hand | Article: IXS Evo-Air Motorcycle Gloves, black-grey, Size 2XL | Article: IXS Evo-Air Motorcycle Gloves, black-grey, Size 2XL, black-grey, Size 2XL

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr