Free
Support
Vandy Vape Pulse BF 80W Squonk Box Mod is a collaboration by Vandy Vape and Tony B. The new Pulse BF Mod is no longer a mechanical mod, but a regulated mod with built-in Vandy chip, which is also used in Voopoo Drag and Alpha One. With 80W maximum output and 8ml bottom feeder bottle, Pulse BF 80W Mod will bring you better squonking experience. Powered by Vandy chip 0.91 inch OLED screen 8ml silicone bottle 95% working efficiency Supports vaping while charging 0.010 second firing response time Gold plated battery contacts Tactile firing but ton Easy grip squonk bottle Interchangeable dual magnetic battery panels 510 connector with the creative leaking proof design 2A Micro USB rechargeable Protections: short circuit, over-current, switch timeout, over-heat, over-charge, over-discharge Powered by 1x 18650/20700 battery (sold separately) Temperature range at 200-600'F/100-315'C Firmware upgradeable Brand: Vandy Vape Variable Wattage 1-80W Input Voltage 3.2-4.2V Output Voltage 0.5-8.5V Output Mode VW/TC-Ni/TC-Ti/TC-SS316/M1-M5/TC-NC/TCR Resistance Range 0.05-3ohm(VW) / 0.05-1.5ohm(TC) Size 82 x 56 x 27mm
Tipo:Encendedor Butano; Estilo:Tienda; Características:Estuche; Fuego:Fuego Simple; Material:Metal; Color:Blanco; Dimensiones (cm):8.32.8.7; Peso (kg):0.05; Contenido del Paquete:1 Encendedor
Nicorette Invisi 10mg Patch (Step 3) Nicorette Invisipatch is a discreet, easy-to-use, once-a-day solution to help you deal with the cravings and withdrawal symptoms associated with quitting smoking.
It is most suitable for you if you are a regular smoker who smokes throughout the day.
How does it work? The Nicorette Invisipatch helps you to quit by delivering a continuous, controlled dose of nicotine into your body to help relieve cravings and withdrawal symptoms. The nicotine is released through your skin over 16 hours. It is absorbed quite slowly compared to smoking a cigarette so you should be prepared to wait a little while longer for the nicotine to get into your system.
Directions For your Nicorette Invisipatch to work it is important that you use it properly, so make sure that you read through all the instructions carefully.
Do: Apply one fresh Nicorette Patch first thing every morning Remove the Patch before going to bed and dispose of it safely Apply the Patch to a clean, dry, hairless area of skin on the front or side of your chest, upper arm or hip. Do not: Apply the Patch to the same spot of skin two days running Use the Patch on broken or inflamed skin Smoke while you are wearing the Patch. Nicorette Invisipatch Reduction Guide It is important to gradually reduce the amount of nicotine you absorb until you can do without it.
If you smoke more than 10 cigarettes a day, then the Nicorette Invisi 25mg Patch is a good starting dose for you. The Nicorette Invisipatch is available in three strengths (25mg, 15mg & 10mg), so you can start on the highest dose and then gradually reduce your intake: Start with the higher strength 25mg full strength patches for eight weeks Switch to the 15mg patch for two weeks Finally, lower the dose to the 10mg patches for a further 2 weeks before giving up all together Or if you smoke less than 10 cigarettes a day, then you should start on the 15mg patch for 8 weeks, then cut down to the 10mg patch for 4 weeks.
Remember, if you have any questions or are not sure of anything, please ask your pharmacist or local GP for advice and always read the label.
Rincoe Manto Mini Kit is a cost-effective kit for new vapers and advanced vapers. Constructed by PC material, the water transfer painting makes the device more classic and comfortable in hand, and it is more stable with the Anti-shock function. Powered by single 18650 battery, it can fire up from 1W to 90W maximum output. As for the included Metis RDA, featuring a wide bore 810 drip tip and a simple deck which is easy to build and wick, brings dense flavor as well. PC material& Water transfer painting Small size and strong power 1W-90W output wattage Temperature range at 100-300
This is E-XY NI80 (Nichrome 80) Tri-Core Fused Clapton Coil High Density Heating Wire For RDA RTA Atomizer Heating Wire DIY Building, the length is 15 Feet (5 Meters), 5M/Roll. Model: Tri-Core Fused Clapton Material: NI80 Gauge: 3*28GA+36GA Name: Resistance Wire
Here comes the Coilology Performance Coil Set. It includes seven types Ni80 coil with different resistance. Together with 12 strands of organic cotton, you can enjoy the optimal clouds and flavor. Best choice for DIY lovers. Just get the Coilology Performance Coil 7-in-1 now! Quantity: 42pcs/pack Diameter: 3mm Cylinder Number: 5 6x Fused Clapton Coil: 2-26/36GA,0.34ohm 6x Tri-core Fused Clapton Coil: 3-26/36GA,0.21ohm 6x Staple Coil: 8-0.1*0.3/36GA, 0.34ohm 6x Framed Staple Coil: 2-28/4-0.1*0.3/36GA, 0.3ohm 6x Multi-strands Fused Clapton Coil: 2-28/9-38/36GA, 0.32ohm 6x Chain Link Coil: 4-28GA, 0.32ohm 6x Juggernaut Coil: 2-26/0.1*0.4/2-36GA, 0.36ohm Name: Pre-made Coil Wire Brand Mode Coilology Material Ni80 Diameter 3mm Quantity 42pcs