Rustins Danish Oil 5 Litre

Master Lock classic brass padlocks are a tough and reliable security solution. The solid brass body has a modern diamond shaped design and a brushed finish. The extensive range of brass padlock options means there is a Master Lock brass padlock for just about any need. Each padlock has a solid body, hardened steel shackle and dual locking levers. A variety of multi-pack options, where all padlocks in the pack open with the same key (keyed alike) is also available. Padlocks are available with 4-pin, 5-pin or 6-pin cylinders and with a variety of shackle lengths for added security and for a wider range of possible application options. All Master Lock padlocks are supplied with a minimum of 2 keys and a Lifetime Warranty against mechanical failure. Suggested Uses: Gates, containers, storage units and sheds.The Master Lock 150EURT has the following specifications: 2 x 50 mm solid brass padlocks - 25mm hardneed steel shackle, 7mm diameter - 5-pins - keyed alike

The R.S.T. Pole Sander provides an easy and efficient way of sanding the joints between plasterboards on a ceiling after they have been filled. A swivel head is attached to a wooden pole via a metal thread, and allows easier access into corners. The sander has a soft rubber pad and to keep the the abrasive secured, it has metal clamps. Other poles are available.

The ABUS 65 Series open shackle brass padlocks have a body which is made from solid brass, hardened steel shackle up to 30mm and hardened steel alloy shackle 40mm and above. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. They are suitable for low to medium security requirements and are also suitable where a strong requirement for service performance and longevity is required. The padlock locking is automatic, it does not require a key.The cylinder can be re-keyed to match an existing key (Keyed Alike). Overall width: 20 mmOverall height: 34 mmOverall depth: 10 mm Shackle width: 9.5 mm I.D.Shackle height: 11.5 mmShackle Dia: 3.5 mm

The RIDGID Heavy-Duty End Pipe Wrenches are ideal for pipe work close to a wall, in tight quarters or in closely-spaced parallel lines. It has a sturdy cast-iron housing with an I-beam handle with full floating forged hook jaw and self-cleaning threads. The hook and heel jaws are replaceable.RIDGID Heavy-Duty End Pipe Wrench Size: 350mm (14in).Capacity: 50mm (2in).Weight: 1.6kg.

Hammerite "Direct to Rust" Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3-in-1 formula, there is no need to use a primer or undercoat...saving you precious time! It forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion-resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Two coats are required and protects up to 5 years. Specification: Colour : White Finish : Smooth Size : 400ml Coverage : 0.5m²/L

This Forge traditional silent Cabin Hook is suitable for heavy-duty applications. The tight fitting hook and eye prevents movement hence the silent application. Made from solid brass and supplied with all fixings and fitting instructions. Fitting Instructions:1. Place cabin hook in the desired position, and mark fixing holes with a pencil.2. Use the screws provided to secure in place, additional fixings may be required for brick or plasterboard surfaces.3. Place the keep on the hook end and position so that the door is secured as desired and screw into postion.Finish: Brass. Size: 152mm (6 inch).