Reely (511022C) Ersatzteil ET Rammschutz mit Halter (511022C)

Type:Watch Batteries; Material:Plastics; Height:2; Coat Bust:5; Net Weight:0.05; Listing Date:05/04/2021

Attop XT-1 WIFI FPV 2.0MP 720P HD Cámara plegable Drone RC Quadcopter RTF Versión de dos baterías

The Avengers Infinity War Black Widow Action Figure Collectible Figure Marvel Movie Fans Gift

URUAV UR4 0V / 3.0V-4.0V 6 Grade Lipo Killer Discharger Disposer for LIFE / Lipo Battery RC DroneSpecification:Brand Name: URUAVModel: UR4 Lipo KillerItem Name: 0/ 3/ 3.2/ 3.4/ 3.6/ 3.8/ 4V Battery Discharger for 1-6S Lipo BatteryBattery Type: Compatible with Lipo BatteryLIFE BatteryDischager Range: 0/ 3/ 3.2/ 3.4/ 3.6/ 3.8/ 4VDischager Current: 4.0V-30.V 100mADischager Time: 75min @ 0.1V ( Example as 1300mAh Lipo Battery)Connector: 4.0V-3.0V Dischager Connector ( Must Plug in Balance Head or Pins ) 0V Dischager Connector ( Must Plug in XT60 Connector)Notice: MUST Plug right connector to counterpart discharger connector.Dimension: 65x33x10mmWeight: 18.8gUsage Instruction:0V Discharger- Plug your batterys XT60 Connector in the yellow connector ( on the right side of board)- Then 0V LED will keep lighting untill finishing dischager- 0V LED Light goes off, which points at battery dischager to 0V.- Discharging to 0V need 24 hours above4.0V-3.0V Discharger- Plug your batterys balance pin head in the Pin connector ( On the left side of boaed ) Notice: The batterys black cable points atG ( The word showed on the board) DONT plug in opposite side.- Then this lipo killer will test how many cells of your battery and counterpart LED will light on. 1S-6S Discharge LED will keep light. ( The lighting LED Number depends on your batterys Cell)- PressSetbutton to set the voltage you want to discharge. ( 3/ 3.2/ 3.4/ 3.6/ 3.8/ 4V Optional) Notice: The voltage you set mustlowerthanyour

Cheerson CX-40 0.3MP Cámara Wifi FPV Drone Optical Flow RC Quadcopter

Feature:Before throwing away damaged or old LiPo batteries, you should first drain them completely until there is no charge left. In this article I will show you how to build a battery discharger using high power resistors.Simply connect the power resistor, or multiple of them, to your battery. Leave it for several hours or even overnight, it will discharge the battery completely eventually.Although the discharging is quite slow, its gradual which is relatively safer for damaged batteries. There is no heat build up in the battery and so no puffing.You can speed up the process by connecting a number of resistors in parallel using a splitter. If you are using 3 of them, it will discharge 3 times faster at 0.9A.Specification:Name: DIY Resistor DischargerPlug:XT60Weight: 55gPackaging included:1XDIY Resistor Discharger