Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to ISO 9001. Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.Size 8.5Adjustment . 184 - 216mmAdjustment. 7.1/4 - 8.1/2in
Hammerite "Direct to Rust" Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3-in-1 formula, there is no need to use a primer or undercoat...saving you precious time! It forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion-resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Two coats are required and protects up to 8 years. Specification: Colour : Cream Finish : Smooth Size : 750ml Coverage : 5m²/L
Tacwise fine wire staple, commonly used for semi-industrial/DIY applications. This staple is thinner than 140 type and not so visible. Suitable for the Tacwise Z1-53, Z1-53l, Z1-53T, Z3-53, Z3-53L and the Hobby 53EL as well as the Arrow JT21, Rapid R53 and other brands taking the popular 53 staple.Size: 6mm.Pack quantity: 2000.
Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact. Designed to drive nail heads below the surface of the wood.Point Diameter: 4.0mm (5/32in)Length: 100mm (4in)
Stahlwille Series 49 INHEX Sockets have 3/8in square drives and are suitable for socket head/hex head screws. Made from chrome alloy steel and chrome plated. Manufactured to DIN 7422 standards. Overall length: 52mm.Metric sizes. MADE IN GERMANY.Stahlwille In-Hex Socket 3/8in Drive. Size: 3mm.
A tough steel construction with concealed hinge pins and concealed screw heads. Coach bolts supplied with carded versions only. Hardened steel staple. Where to use it: Joint hasps for corner solutions, e.g. chests, cupboards Suitable for doors not closing flush, i.e. door leaf and door frame are not level.Hasp length: 155mmHasp width: 45mmStaple bore dia: 12.5mm
Designed for use with angle grinders with a compatible thread and are suitable for industrial use and more specialist applications. Twist knot wire brushes are suited to heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Wire: High tensile twisted steel Type: CupFace Diameter: 100mmThread: M14 x 2Wire: 0.5mmConforms to ISO 9001 and DIN EN1083-1 and 2Maximum rpm 8500
