The Rawplug Projecting Rawlbolt is suitable for heavy-duty metal fixing in which large bolts are anchored in a metal housing or shield for securing heavy items in concrete. Ideal for overhead and ceiling work, securing cable trays, ducting and trunking or installing radiator brackets, partitions and structural fixtures.Size. M10 x 60mm.Mximum Fixture Thickness: 60mm
These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 125mm (5 in). Blade length (B): 16mm (0.63 in). Head width (C): 16mm (0.63 in). Head depth (D): 8mm (0.31 in). Tip width: (F): 1.6mm (0.06 in). Cutting capacity: 0.4-2.0mm. Cutting edge: Micro-bevel. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.
The DEWALT DCK206M2 Twin Pack, contains the following: 1 x 18 Volt DCH253 3 Mode SDS Hammer Drill that is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. The hammer drill has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal. It uses 4.0Ah 18 Volt Lithium Ion batteries to deliver high performance, long life and maximum runtime. No Load Speed: 0-1,200/min.Impact Rate: 0-4,500/min with 2.1 Joules.Capacity: Concrete: 24mm, Steel: 13mm, Wood: 26mm.Weight 3.1kg. 1 x 18 Volt DCD785 XR Compact Hammer Drill Driver has an ultra compact, lightweight design that allows it to be used in confined spaces, whilst the intelligent trigger design allows for total control of application. It has a two speed, all metal transmission for increased run time and a longer tool life. Chuck: 13mm Keyless.No Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/bpmTorque: 60Nm, 14 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 38mm 1 x 10.8-18 Volt DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LEDindicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-Ion DEWALT Slide Pack 10.8, 14.4, and 18 Volt batteries.
Evolution's Electric Disc Cutter easily cuts Concrete, Stone, Brick, and Paving, even reinforced concrete, with the supplied diamond blade.The powerful 2400W motor makes easy work of the most robust materials and because it is electric there are no harmful fumes, making it ideal for work in enclosed areas.The ergonomic support handles are ideally positioned for perfect balance when cutting and the spindle lock mechanism means blade replacement is quick and simple.Technical Specifications:Motor: 2400WSpeed: 5000/minDisc Diameter: 305mmDisc Thickness: 2.0mmBore Diameter: 20 / 22mmDisc Weight: 1.78kgMax Cutting Depth: 100mmMachine Weight: 9.5kgProduct Dimensions: 464x575x390mmRecommended Maximum Duty Cycle: 20minsSound Pressure Level (Under Load): 102.4dB(A)Vibration Level: 4.8m/s2Gross Weight: 11.82kgIncludes:Dust Extraction PortSpannerOperator's Manual1 x Blade
The ABUS 65 Series long shackle brass padlocks have a body which is made from solid brass, hardened steel shackle up to 30mm and hardened steel alloy shackle 40mm and above. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. They are suitable for low to medium security requirements and are also suitable where a strong requirement for service performance and longevity is required. The padlock locking is automatic, it does not require a key.Shackle produced from hardened steel. Precision pin tumbler cylinder. The cylinder can be re-keyed to match an existing key (Keyed Alike). Overall width: 40 mmOverall height: 103 mmOverall depth: 15 mm Shackle width: 22 mm I.D.Shackle height: 63 mmShackle Dia: 6 mm
Yale brass padlocks are a good quality multi-purpose solution. They are essential padlocks available in a range of sizes and are suitable for a multitude of security applications. The YE1 padlocks are general purpose padlocks with a solid brass body and chrome plated shackle. They are great for securing items which require a standard level of security. Supplied with 3 keys.Specifications: Body dimensions: 50 x 38 x 16mm.Padlock total height: 72mm.Shackle internal: 26 x 26mm.Shackle thickness: 8mm.
