Stanley Galvanised Metal Toolbox 23In 1-95-619

The ABUS E60 Euro profile half cylinders are suitable for switch gear & garage doors They have precision, mushroom pin and paracentric keyway which offer comprehensive anti-pick protection, also they have a hardened steel anti-drill spring & pin protection with 8 anti-drill pins in every keyway. For emergency and convenience feature the outside key can operate the lock with internal key in place. How to measure a Euro Profile Cylinder: Distance from one end of cylinder to centre of cam

High leverage compound cutting action snips made from forged alloy steel. Chrome Molybdenum construction with serrated cutting edge to prevent slippage when cutting. The one handed automatic latch releases with the squeeze of the handles which are bi-material for extra comfort and grip. These snips cut up to 18 gauge steel and are suitable for cutting aluminium, sheet uPVC, wire mesh, leather, copper and plastic. Size: 250mm (10in).1 x Stanley Yellow Long Aviation Snip Straight Cut 250mm (10in)

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S

The Zarges Masterstep is safe and comfortable for optimum freedom of movement. It has a particularly large work platform (400mm x 400mm) with aluminium checker plate surface and 80mm deep steps with ZARGES Safer Step Technology for fatigue-free standing. Two handrails are supplied as standard for safe access. The ladder has an extra wide base which provides additional stability, and two high-strength Perlon straps for preventing splay. Its treads and stiles are made from extruded aluminium sections, and have high strength ZARGES quality flanged connections. In addition, two side locking bars prevent the step collapsing in use / during movement. Includes practical aluminium storage tray for small items, and an extra high knee rail. They conform to EN 131 standards, and have a 150 Kilo rating. Has a 10 year guarantee.Number of treads: 4. Platform height: 1.06m. Closed length: 2.15m. Weight: 6.6kg. Stile depth steps / back stay: 73 / 58mm. Overall base width: 0.62m. Base spread: 1.07m. Delivered Direct to Business, Site or Home, please note a carriage surcharge may apply dependant on the delivery address, please contact us for further details.

Roughneck Claw Hammer is manufactured from drop forged hardened and tempered alloy steel, and with a fully polished head. Tubular steel handle with a strong head to shaft connection. The ergonomically designed grip is riveted to the handle for additional safety. Unique triple injected TPR soft-grip handle for comfort during use and reduced fatigue.Weight: 450g (16oz).

The Li-ion range delivers 430% more working capacity during the lifetime of the battery compared to Ni-Cad and is 40% lighter than NiMH. The Li-ion has minimal depletion of power during use or in storage over it's lifetime. Features: Foam cell technology. Slide on battery, firm holding with multi contacts and shock absorbing pack. It will not puncture and remains cool even in heavy use. Makita have a comprehensive range of professional Lithium-ion tools available on the market, so what ever your trade, you will be confident that you have made the best choice.