Answer AR1 S20 Matte, cross helmet

Specification:Name:Lawn Mower Working Head AssemblyColor:black+silverMaterials:65 manganese steelRotating Speed:11500rpmDisplacement:37ccSize:28mmTeeth:7/9Features:Suitable for weeds grown in sandy and economic crops.65 manganese steel material, durable and not easy to break.Widely used in: vegetable greenhouses, , nursery, orchard, tea garden management.Note:Please allow a bit error due to manual measurement. please make sure you do not mind before you bid.The color may have different as the difference display, please understand.Package Included:1 x Weeding Wheel

Gürtel mit Metallschnalle und FOX Head Logo Branding 100% Polyurethan

DETAILS: Ventilation on the hips. Adjustable waist with elastic strap, Hook and buttons closure. Front and rear reflective inserts, 2 pockets.

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

The Spark speaks for itself. Its origins from motorcycle sport are instantly recognisable, yet it retains Furygan’s characteristics in a textile garment and offers practicality and comfort that can adapt to every situation. features


Spark is approved Main External material: higt tenacity polyester for abrasion resistancy Waterproof insert Zippable flap that fastens underneath the main zip in order to create the perfect barrier against wind and rain Reflective inserts on the chest and on the back D3O protectors for shoulders and elbows, which offer full protection without restricting comfort and freedom of movement Neoprene inserts on the collar and the wrists for maximum comfort

Features
Top quality cow leather Ballistic polyamide & stretch aramid panels Polyamide lining D3O shoulder & elbow protectors in accordance with the norm prEN1621-1:2011 (Level 1) D3O back protector in accordance with the norm prEN1621-2:2011 (Level 1) knee protectors in accordance with EN1621-1:1997 External shoulder cap offers extra protection Thermo-removable liner 3-layer removable breathable Humax Membrane® with a water column of over 10.000 mm 2 AVS zippers on the back 2 pockets at the side and 2 inside pockets The liner also has 2 inside pockets and an extra mobile phone pocket Trousers can be worn over or in boots Long & short connection zipper to attach jacket & trousers to each other Waist adjustment (velcro) possible on both jacket & trousers Knee protectors’ position is vertically adjustable