Hammer fixings are for fast fixing with minimal screwdriver work. Quicker to use than standard plugs. For fixing stud battens to walls before cladding. Although hammered in, they can be un-screwed.Size. 5 x 50mm. Card of 10.Fixture Thickness 25mm.
The Faithfull Centre Square (Finder) is made from ground tool steel and has a hardened and tempered blade. The device has a useful square for rapid location of round bar or disc centre. To execute, place the round bar between the centre square. Scribe different lines on the workpiece each time changing its position. The centre of the scribed lines will provide the accurate centre of the workpiece. The Centre Square (Finder) is supplied in a box.Bar Capacity: 75mm.
User benefits Slide type Li-ion battery Ergonomic soft grip Blower function - blows sawdust off the line cut Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current. High power Bevel cuts up to 45 degrees On-tool storage for hex wrench.
User Benefits: Safety Paddle Switch. Electronic current limiter for overload protection. Soft start feature. Anti-restart function. Electric brake. Battery fuel gauge. Rubberised soft grip. Automatic Speed Control: Automatically changes the cutting speed according to load condition for optimum operation. High power motor. Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current. Kickback user protection: Shuts down the tool to protect the user if rotation speed suddenly slow down (e.g. kickback). Specification: Voltage: 18v Bore Diameter: 22.23mm Max Wheel Thickness: 6.4mm Noise Sound Pressure: 79 dB(A) Noise K Factor: 3 dB(A) Max Wheel Diameter: 125mm No Load Speed: 8,500/rpm Vibration K Factor: 1.5 m/sec² Vibration Surface Grinding: 6.0m/sec² Vibration Disc Sanding: 2.5m/sec² Net Weight: 2.6kg
Record Irwin V150B Woodcraft Vice is lighter in construction than the standard woodworking vices, this useful portable vice can be attached to most working surfaces by means of a 2.1/4in capacity integral clamp. Provision is also made for the body to be screwed permanently to the bench if required. High quality cast body fitted with carefully aligned steel slide bars and main screw. Jaw Width. 150mm (6in).Jaw Opening: 115mm (4 1/2in).
Self-guided trimming bits. Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread wear of cutting edges D = 9.5 mmC = 12.7 mm