Wall Mount Antique Brass Faucet, Garden Outdoor Decorative Hose 1/2 inch Connection Spigot Carving Desigh with Cold Water Only Lightinthebox

Jetcem is a specially formulated rapid setting cement based patching/repair compound which, when mixed with water, sets in about 30 minutes. Rapid setting (30 minutes, depending on ambient temperature and conditions).Easy mixing, just add water.Fills up to 25 mm in one application (for deeper holes in excess of 25 mm use Jetcem Premix sand/cement) Benefits: Internal and external repairs to gaps and cracks and walls and floors.Repairing flags, slabs, stones and bricks.Patching steps and window sills.Pointing brick and stone.Jointing earthenware pipes and drains.Repairs to ponds and pools.Setting in W/Cs and sinks.Leak sealing in concrete based surfaces.Setting railings and posts.This pack comprises 4x 3kg Jetcem Rapid Set Cement.

Faithfull flexible latex impregnated waterproof backing paper coated with an aluminium oxide abrasive. Used wet or dry for sanding paint, primer and body filler. Coarser grades are ideal for removing major imperfections, finer grades are ideal for final painting. Super fine grades allow exceptionally fine finished to be achieved, especially when used wet. These sheets can be cut to any size, making them very versatile for use in assorted applications. C-weight paper on grades C60-C180.A-weight paper on grades A240-A1200.Pack quantity: 25 Size 280 mm x 230 mmGrade: C180

The Knipex 26 21 200 bent long nose side cutters have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm. The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC. The jaws are angled at 40° and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications. Knipex have used a good quality special tool steel material that is oil hardened. Dipped handles.The Knipex 26 22 200 bent long nose side cutters have Bi-material, 2-component handles for a more comfortable and positive grip. They have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm. The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC. The jaws are angled at 40° and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications. Knipex have used a good quality special tool steel material that is oil hardened. Hard wire diameter: 2.2 mm.Medium wire diameter: 3.2 mm.Hardness approx. 61HRC.Length. 200 mm.

A slimline design and soft-grip surfaces make for a comfortable, in hand fit. It also has an automatic spindle lock, which makes it easy to change tools, a 10mm quick-change drill chuck and an LED light to illuminate the work area.

Flexovit Waterproof Sanding Sheets can be used wet or dry and is a highly flexible high quality Silicon carbide abrasive. Waterproof paper is specially treated making it ideal for use with water or other lubricants. The paper lasts longer and gives a smoother finish when used wet as the water cleans, lubricates and helps prevent clogging. Size: 230 x 280mm.Packed in 3s

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken.Shank: 1/4in.D - Diameter - 15/64in 6.0mmC - Cutting Length - 5/8in 16mmT.C.T. 2 Flutes.