Auto Universal Fahrzeug 3cm Kurzstab Dachantenne + Raku 2 Steckdosen mit Verstärker Set

EL-50448 Tire Pressure Monitor Sensor TPMS Activation ToolDescription:1. Use EL-50448 or equivalent tools to diagnose sensor function:Each sensor is equipped with a low frequency coil. When the tire pressure monitoring isused to enable mode, the low frequency transmission signal of the starting sensor is generated.In the read mode, the sensor responds to the low frequency start by transmitting the signal.In the tire pressure monitor read mode, when the body control module receives a read mode signal transmission,sensor identification code assigned to and read in order corresponding to the position of the vehicle.2. Sensor function - the use of pressure increase / decrease methodIn a static mode, each sensor is sampled at a pressure measurement every 30 seconds.If the tire pressure is increased or reduced by more than 1.2 (LB / sq ft) compared with the previous measurement,it will be immediately re measured to confirm the pressure change value. If the pressure does change, the sensor istransmitted in a read mode. In the tire pressure monitor read mode, when the body control module receives a read modesignal transmission, sensor identification codes are allocated to the vehicle and read in order corresponding to the position.Feature:Type: Tire Pressure Reset instrumentDetection System: BuickModel: EL-50448Power supply voltage: GM models el50448 (V)Package Included:1 X Tire Pressure Monitor Relearn Tool1 X Battery1 X Charger

Type:LED; Puissance (W):3; Douille de lampe:H3; Quantité de LED:24; Couleur de la lumière:Rose

Tipo:LED; Potencia (W):2W; Color temperatura:6000K; Luz:Alto; Soporte de Lámpara:1157; Cantidad de LED:22; Color de la Luz:Blanco; Dimensiones de Unidad / L x A x L (cm):2x2x2cm; Peso Neto (kg):0.005kg; Función:Luz de Freno; Tipo de Chip: LED de Alto Rendimiento; Material:ABS,Aluminio; Características:De Alto Rendimiento

Type:LED; Puissance (W):45W(153W CREE) ; Température de couleur:6000K; Couleur de la lumière:Blanc; Dimensions/LxLxH:15.87.512.5; Poids net (kg):1.18; Fonction:Feux anti-brouillard; Type de puce:LED Haute Performance; Matériau:Aluminium Die-cast; Caractéristiques:Etanche,Puissance élevée

Description:1. Cerium Oxide is the best polishing powder to glass scratch because the chemical and physical reaction.2. Easy to use,just mix powder with water and apply to the glass surface with the polishing felt to restore lightly scratched windows, mirrors,car windshields,even car headlights to like-new condition.Specification:MaterialSpongeWoolenColorOrangeWhiteBlackSponge pad dia150mm/180mmBacking pad inner sizeM14 ThreadHow to use:1. Clean the area youre going to work on thoroughly. Be sure there is no dirt or grime on the glass.2. Have two small plastic tubs ready; quart or pint sized containers work well. Fill one halfway with water.3. Place your polishing wheel into the water; let it become thoroughly damp, but not dripping wet.4. Put some of Cerium Oxide into the empty tub, and add enough water to create a slurry (a thin, paste-like mixture).5. Attach the dampened polishing wheel to your electric drill and dip it into the slurry.6. Place the polishing wheel on your work area, use small size felt wheel if scratch is near corner of windows,keep the wheel moving in an up and down and circular motion.Notice: Be sure that the slurry does not dry up, as this could cause your glass to overheat and crack.If your slurry is becoming dry, you can spritz it with a spray bottle full of water.Package Included:4 XOrange Flat Foam Buffer Pads 150mm3 XWhite Flat foam buffer pads 180mm3 XYellow Undulating foam buffer pads 150mm3 XWhite Wool Buffer Pads 180mm3 XGray DishClothes1 XBa

Type:LED; Puissance (W):3W; Température de couleur:6000K; Douille de lampe:H11; Quantité de LED:27; Couleur de la lumière:Blanc; Dimensions/LxLxH:5.33.24; Poids net (kg):0.039; Fonction:Feux anti-brouillard; Type de puce:SMD 5050; Matériau:PCB LED; Caractéristiques:Feux