Back Vent Single Breasted Woolen Coat

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

2in1 touring jacket with big leather reinforcements Features
500 D Polyamide large leather reinforcements on crash zones 3M™ Scotchlite™ reflectors AirVent ventilation zips Humax® membrane: 100 % waterproof, 100 % windproof, breathable detachable thermo lining SAS-TEC shoulder and elbow protectors certified according to EN 1621-1:2012 (protection level 2) elbow protectors are adjustable in height upgradable with back protector SAS-TEC SC-1/12 for sizes XS - XL upgradable with back protector SAS-TEC SC-1/16 for sizes 2XL - 3XL upgradable with back protector SAS-TEC SC-1/13 for sizes 4XL - 10XL connection zip

Product Description:Material: stainless steelColor: stainless steelScale: 1/35Size: 9x8cmFeatures:● Stainless steel material, not easy to rust● Long life and durable● Easy to useApplication: For 1/35Package include:● 1 x Spray TemplateWarning:1.Due to manual measurement, please allow 1-3cm error, thank you2.Due to shooting problems such as light, there will be chromatic aberration, please be careful.

Outer shell
750 D Tactel material from DuPont Contains non-textile parts of animal origin
Lining
mesh lining (100% polyester)
Membrane
detachable waterproof, windproof and breathable HUMAX Z-liner® inner (100% polyester with 100% polyurethane coating)
Fit/features
3 external pockets air-vent zippers large stretch panels in the thigh, knee and calves for a perfect fit waist belt elasticated waist PITTARDS® leather anti-slip seat patch
Protection
optional hip protectors EN 1621-1 CE-approved height-adjustable SAS-TEC® 3D knee protectors reflective sections Connecting zip

Description:1. The back of the light bar affixed with adhesive, easy to install.2. Vibration proof , Waterproof, you can drive safely even on rainy days.3. Flexible,Can be used as front and rear signals.Specification:Product Name: Motorcycle Strip Turn Signal LightMaterial: FPCLight Color: AmberShell Color: BlackInput Voltage: 12VSize: 10.8*1cmLED Type: SMD 5050 LEDCable Length: 48cmWorking Temperature: -20-60 ℃Waterproof Rating: I65Number Of LEDs: 6 Per StripInstallation Method: PasteFitment: UniversalNote:1.We provide clear pictures, measurements where possible.Please check as much as possible to make sure the item is the one that you need.2. Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)3.There are no instructions included in this kit.If you want to know how to use orinstall it,please contact us by Email.We will provide help as much as possible.Package Included:2 X Turn Signal Lights

2X 13 LED Universal Motorcycle Motorbike Turn Signal Indicators Light Lamp AmberDescriptionMaterial: PlasticCase Color: BlackLens Color: AmberLED Color: AmberQuantity: 2 pcsLEDs per Light: 13 LEDsVolt: 12V DCUsage: Turn Signal /Indicators LightsCompatibility: UniversalDimension:Like the picture showConnection: 2 wiresWire length: 24cmFitment:Universal fit all the motorcyclePackage includes:2 x Motorcycle Turn Signal Lights