Pet Car Back Seat Cover Protector Mat for Trunk SUV Pet Supply 132x99x43cm

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Le casque Scorpion VX-15 assurera que tu es à l’avant du champ lorsqu’il s’agit de style. Ce casque tout-terrain est extrêmement léger et durable et intègre une foule de caractéristiques de confort et de sécurité. Le casque VX-15 Air dispose de la technologie Airfit de dernière génération pour vous permettre de s’adapter à l’intérieur de votre casque parfaitement à votre visage. Grilles de ventilation que l’air puisse circuler à l’intérieur du casque offrant le plus haut niveau de ventilation afin que vous pouvez effectuer à votre meilleur.Coque en Polycarbonate Composite conçu avancéAirfit Concept permet les coussinets de joues à être gonflé et dégonflé comme nécessaire pour atteindre la coupe parfaite et la performance tout en augmentant la protection en cas de chocÉvacuation de l’humidité KwikWick casque pads doublure et de la joue, qui est perméable à l’air, hypoallergénique, amovible, doux et lavable en machineVisière ajustable, aero à l’écoute pour réduire la portance à des vitesses élevéesGrilles de ventilation pour laisser l’air circuler à l’intérieur du casqueGrande ouverture pour une visibilité maximale et pour assurer la compatibilité avec toutes les lunettes de protectionPoignée sangle pour maintenir les lunettes de protection en placeMentonnière rembourréeBlocage rapide la jugulaire double D boucleÉvent bar menton amovible pour un nettoyage facile du filtreRembourrage compatible de Neck braceCoussinets de joues mousse triple densitéCertification :Ce casque et visière passe la norme ECE 22.05 pour utilisation de casque de moto dans l’UE.

LED Spider Man Style Flashing LED Glasses

Kuh und Känguru-Leder Leder-Perforationen im Frontbereich, den Armen und den Beinen Zweilagig an den äußeren Oberschenkeln und am Gesäß Außenprotektoren an Ellbogen, Schulter und Knien. Stretch mit Faser-Verstärkung im hinteren Schulterbereich und Lendenwirbelbereich Vorgeformter Brustbereich, Beine, Schulter und Ärmel. Herausnehmbares Polyesterfutter mit hochdichtem, stoßdämpfendem Schaumstoff Hochfeste Nähte. Ausgestattet mit Slidern

Robust cargo pants made of sturdy canvas with aramid reinforcement. These pants are reinforced with Twaron on hips and buttocks. An aramid fiber that meets the very strict standards of inspection standards 13594-2 and 13594-4. In the area of abrasion and tear resistance it performs well in the highest categories (Level 1 and Level 2). These pants come with tested Knox Flexiform knee protectors that are easy to put in or remove from the pockets. The position of the protector is adjustable in height. Both the protector pocket and the entire seat are mesh lined for maximum ventilation.

Outer garment
Fibretech 600D : soft & resistant
Membrane
Waterproof & breathable membrane
Isolation
Full removable thermal lining 120g Fixed lining laminated to the membrane
Protection
Adjustable approved elbow protectors Approved shoulder protectors Pocket for approved back protector
Comfort
Body fit Front & back ADS ventilation system Comfort neprene collar Adjustable waist Zip cuff fastening Reflective material Strap for conneting with trousers