Germot Challenger, textile pants waterproof women

Ergonomy
Neck EST adjusting control Flexible construction on joints
Material
Very strong microfibre Elastic high tenacity 6.6 Nylon, extreme abrasion resistance Goat Leather, 0.6/ 0.8 mm thick, high fitting performance Elasticized fabric Goat Leather
Safety
Palm padding Back of hand padding Side of hand padding

Holbrook is a timeless, classic design fused with modern Oakley technology. Inspired by the screen heroes from the 1940s, 50s, and 60s, this design epitomizes the spirit of exploration and adventure. The iconic American frame design is accented by metal rivets and Oakley icons, perfect for those who seek equal parts performance and style. Features
Oakley HDPolarized lenses filter out 99% of reflected glare without the haze and optical distortion that can come with traditional polarized lenses. Plutonite® Lenses offer top UV Protection filtering 100% of all UVA, UVB, UVC and harmful blue light up to 400nm Patented High Definition Optics® (HDO®) provides superior optical clarity and razor-sharp vision at every angle O-Matter™ stress-resistant frame material is both lightweight and durable for all-day comfort and protection
Polarized® Improving safety, comfort and performance, Oakley HDPolarized lenses filter out 99% of reflected glare without the haze and optical distortion that can come with polarized lenses made with conventional manufacturing techniques.
High Definition Optics® High Definition Optics® (HDO®) is a collection of patented technologies that allow Oakley eyewear to meet or exceed the testing standards of the American National Standards Institute for optical clarity, visual fidelity, and impact resistance.
Frame Fit
1 Lens Width 55 mm 2 Bridge Width 18 mm 3 Lens Height 43 mm 4 Temple Arm Length 137 mm

The iXS Eliott leather jacket is made of nappa leather
Features
Antiseptic polyester mesh lining Detachable thermal lining 3 outside pockets, 3 interior pockets on the thermal vest and 2 inner pockets in mesh lining Shoulder and elbow protectors WINNER® - meet the test standard EN1621-1 Preparation for a back protector

Protection
certified under norm EN 13594:2015 "protected glove for motorcyclists" hard plastic knuckle protection knuckle protection tested (impact test for knuckle protection) special foam knuckle & finger protection reinforced edge of hand reinforced edge of hand & thumb
Fit/features
stretch fabric panels on back perforated finger side walls special flat seam velcro adjustment at cuffs
Lining
unlined palm lightweight lined back
Outer shell
deer leather palm supple cowhide back colourfast & sweat-proof

Specification:Product Name: Motorcycle HeadlightHouse Color: Chrome / BlackLight Source: WhiteBeam: High/Low Beam ConversionMaterial: PlasticLighting Part Type: HeadlightPlacement on Vehicle: FrontWorking Voltage: DC 12VHousing depth: 150mmLens width x height: 75 x 75mmMount: bottom mountQty: 1pcWiring Connection:Black Wire(-): GoundWhite Wire(+): Hi- Beam White LightRed Wire(+): Low- Beam White LightFeatures:Super bright LED front headlightRubber mounts to prevent vibration and fits choppers with bottom mount bracketsChrome ABS Plastic housing and Glass Lens3-wires connectionNo installation instructions includedPackage Included:1x LED Chrome Bullet Headlight

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.