Modeka Sienna Ladies Textile Jacket Black 40

Features
Jeans made in softest cowhide 5-pocket style with rivets full 100 % polyester lining down to the calf plain front

Kuh und Känguru-Leder Leder-Perforationen im Frontbereich, den Armen und den Beinen Zweilagig an den äußeren Oberschenkeln und am Gesäß Außenprotektoren an Ellbogen, Schulter und Knien. Stretch mit Faser-Verstärkung im hinteren Schulterbereich und Lendenwirbelbereich Vorgeformter Brustbereich, Beine, Schulter und Ärmel. Herausnehmbares Polyesterfutter mit hochdichtem, stoßdämpfendem Schaumstoff Hochfeste Nähte. Ausgestattet mit Slidern

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Specification:Color: ChromeMaterial: ABS PlasticPlacement on Vehicle:Left, Right, Front, Rear (ONLY FIT LEFT DRIVER CAR)Quantity:8 pcs/set (4 long pieces + 3 short pieces with no keyhole + 1 short piece with keyhole)Fitment: (ONLY FIT LEFT DRIVER CAR)For Mazda 2 (DJ/DL) 2015-2017For Mazda 3 (BM/BN) 2014-2017For Mazda 6 (GJ/GL) 2013-2017For Mazda CX-3 (DK) 2016-2017For Mazda CX-5 (KE/KF) 2013-2018Features:-No cutting or drilling required.-Weather-resistant with long lasting.-A perfect aftermarket replacement.-Easy Peel-N-Stick installation.Adhesive tape included.-Easy remove without any residual, never harm the painting of your car.-Made of high quality ABS with chrome color surface finish,which can upgrade your cars personality.Package Included:1 X 8 pcs/set

Double spoiler with incorporated air extractors: optimization of the aerodynamic trailand internal cooling. SHARK skin peak side fastenings: passive reduction of aerodynamic noise. A very compact helmet that only weighs 1,290g, while offering a most comfortable and comprehensive accessory. A micro-tech interior with antibacterial properties under the AEGIS label. Features
Constructed from carbon aramid fibre Constructed from multiaxial glass fiber Integrated UV380 label & anti-scratch sun visor Double D-ring strap Visor can be fitted with a Pinlock Max Vision® film insert 2 shell sizes : optimal morphological adjustment Optimal comfort for the persons wearing glasses Quick release visor system Removable and washable cheek pads and inner lining (Use the delicates or cold cycle and place inside a washing net) Planned location for SHARKTOOTH® Anti-scratch visor AEGIS-interior

The X-lite X-661 is the new X-lite Touring helmet that maintains a distinctly sporty feel. Available in three outer shell sizes, this helmet features the eye-catching design of the air intakes and rear spoiler, as well as the fully adjustable inner VPS (Vision Protection System) sunscreen.
The Touring Performance inner padding is made from latest generation fabrics, which, together with the monoblock cheek pads, ensure ultimate comfort and consistent performance even over long distances.
The helmet also features a high quality finish and reflective inserts, as well as outstanding features common to all models in the X-lite range.
Finally, the X-lite X-661 is equipped with a DD-ring retention system and is set up for the N-Com X-Series BX4 PLUS communication system.
Features:
Outer Shell made of Composite Fibre Three Outer Shells Wind Protector Lining/cheekpads: removable, washable, breathable, antibacterial VPS (Vision Protection System) Sunvisor Quick Release Visor Ultrawide Visor Double Action: Device allowing the visor lock to prevent accidental visor opening at high speeds DD-Ring closure ECE 22.05 Visor ready for Pinlock prepared for N-Com X-Series communication system