Klim Radius/Radius Pro, lens mirrored

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Scott tear-offs for the Scott 80S goggles. | Article: Scott 80S Works Pro Tear Off 3 Pack Tear Offs | Article: Scott 80S Works Pro Tear Off 3 Pack Tear Offs, Size One Size

Le Duffle Sherpa est faite de matière super dur, résistant à l’eau. Il a une poche côté clair pour éléments de facile accès, escamotable bretelles à trimballer partout et une coulissante étanche pour garder vos pièces de rechange et outils en. Il existe également des espace pour crampons boueux dans le compartiment étanche côté. Les accessoires de haute Performance qui améliorent nos conceptions sont fournis par des fournisseurs de qualité comme matières plastiques YKK, ITW Nexus et WOOJIN plastiques. La plupart des pièces sont fabriqués à partir de matériaux recyclés Zipperheads verrouillables signifie que vous pouvez verrouiller vos bagages avant de l’archiver Le compartiment de la carte vous donne un endroit pour mettre votre carte de visite, afin que votre équipement trouve son chemin du retour, si elle se perd Custom-moule curseur de fermeture-éclair est super extensible et le rendent facile à mettre et à enlever les engins peu importe ce que les conditions Bretelles détachables signifie que vous pouvez jeter sur votre sac quand vous en avez besoin et cachette sans bretelles pour éviter les enchevêtrements Dimensions : (M) : hauteur : 60 cm, largeur : 38 cm, profondeur : 38 cm, Volume : 75 l Dimensions : (L) : hauteur : 70 cm, largeur : 40 cm, profondeur : 40 cm, Volume : 90 l poids (M) : 1550g, poids (L) : 1590g

* Top feature: the Explorer can also be driven without a helmet shield only with (e.g. mirrored) visor and results in a full-fledged full-face helmet with special optics. * In the helmet shell retractable, stepless sun visor * Emergency release system | Article: LS2 MX701 Explorer C Extend Carbon Motocross Helmet, black-red, Size S | Article: LS2 MX701 Explorer C Extend Carbon Motocross Helmet, black-red, Size S, black-red, Size S

Outer shell
500D Polyamide (100% polyamide)
Lining
mesh lining (100% polyester) detachable inner lining (100% polyamide)
Membrane
Membrane, waterproof, windproof and breathable (100% polyester with 100% polyurethane coating)
Fit/features
2 external pockets waist belt stretch panels at back and knees PITTARDS® leather anti-slip seat patch
Protection
EN 1621-1 certified height-adjustable soft protectors at knees optional hip protectors Connecting zip abraison resistant material reinforcement at knees (100% polyamide)

Features
Classic collar Adjustable cuffs with gusset and strap Adjustement Buckle on waist Press-stud on biceps Bottom with gusset and strap 4 external pockets, 4 internal pockets, 1 waterproof wallet pocket Connection with trousers thanks to small zip on back + loop
Safety
Certified Elbow-shoulder protectors. Level 2 Back protector pocket Reflective material on back
Material
Noxiguard 600D Drymesh 3/2