Motorcycle Voltage Regulator Rectifier For Suzuki DR250 DR350 SV650 LS650

Outer shell
DuPont® Cordura 500 D
Lining
COOLMAX® breathable mesh inner lining
Membrane
removable waterproof, windproof & breathable liner
Fit/features
4 external pockets 3 inner pockets map / document pocket internal cellphone pocket 1 back pocket zip-off side panels zips also adjust ventilation air-vent zippers in front, back & arms dual arm adjustment waist belt soft collar Held Clip-in Technology
Protection
EN 1621-1 approved SAS-TEC® 3D shoulder & elbow protectors optional EN 1621-2 back protector Velcro for optional chest protector reflective sections Connecting zip

Features
Thick soft leather CE- and EPI-certified jacket Sleeveless removable winter liner CE-certified removable elbow guards and shoulder protectors CE Back protector pocket Classic neoprene raised collar Stretch material under the arms Wrists with zip and Velcro strap Strap with velcro and buckle Fitted sports cut Windproof flap under the central zip Jacket/trouser connection: full zip 2 zip pockets for hands 2 pockets with removable liner 1 zip pocket for wallet 1 inside pocket

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Leonardo da Vinci onced said: "Simplicity is the highest sophistication." With this in mind Shoei created a helmet that aimed at the pureness of motorcycle riding. No gadgets, no uneccesary fancy feature, just pure riding in mind. You, your bike and the NXR is all it takes to experience the essence of motorcycleriding Safety
Shell in AIM. Organic fibre and multi-composite fibre in various layers for a shock-absorbent shell with optimum rigidity . EPS-liner system with multiple densities. Optimized protection trough EPS elements with different shock absorbing levels. E.Q.R.S. Security system. E.Q.R.S. (Emergency Quick Release System) for easy helmet removal in case of an accident. Double-D ring. Easy to use and always perfectly adjusted.
Comfort
4 shell sizes: For perfect fit and compact dimensions 1) XXS-S, 2) M, 3) L, 4) XL-XXL 3D center pad: For pleasant wearing comfort Detachable and washable cheek pads, for easy cleaning and in different sizes for custom fit. Detachable and washable chinstrap cover
Ventialtion
MULTIPLE VENTING AND EXTRACTION: 4 Inlets on brow and chin, to guarantee fresh air supply. 6 Outlets at the rear to exhaust warm air. INTEGRATED SPOILER: fresh air supply.
Delivery includeds
breath deflector Wind deflector Shoei helmet-bag This helmet comes standard with a clear visor.
Feel free to download the manual here.

Courroie Cuir de vache avec la couverture d'unité centraleConfort / caractéristiquesboucle en métal de haute qualité ornements à la mode tailles Largeur : 40 mm Longueurs : 85, 95, 105, 115, 125 couleur noir

Magnetic Front Reading Glasses