Alpinestars T-Core Air, textile jacket Drystar

Specifications:- Material: Metal + Plastic- Size: Approx. 390150140mm/ 15.3565.915.51- Voltage: 12V- Power: 8000W- Fuel: Diesel- Complete combustion rate: 100%- Fuel consumption: 0.1~0.24L- Working temperature: -40C~80CFeatures:- Get rid of damage to car causing by the sudden drop of temperature.- Low noise: noise reduction processing with minimal noise.- Easy installation: the compact design is good for using in a variety of narrow spaces.- Two working modes: air condition modeheater mode.- Low fuel and power consumption for longer periods of operation.- Smooth, automatic room temperature control with temperature pre-set facility.- With continuous monitoring and diagnostic system.- Fuel supplied from the vehicles own tank.- Applicable to: various diesel mechanical vehicles such as cars, buses, RVs, trucks, engineering vehicles, etc.Package included:- 1 x New LCD Dynamic Thermostat- 1 x Air Heater- 1 x Silencer1 x Four Tunnel Remote Control (Batteries NOT included)- 1 x Tank(10L)- 1 x Wire Bundle- 1 x Vent- 1 x Air Outlet Pipe- 1 x Intake Pipe- 1 x Exhaust Pipe- 1 x Oil Pump- 1 x Fixed Plate- 1 x White Oil Pipe- 1 x Oil Nozzle- 1 x Fastener- 1 x Installation Kit

*example picture
To upgrade or downgrade the lining of your Arai helmet, you can order the lining in different strengths. To know the strength of your actual lining, please have a look on the label which is fastened on the lining in your helmet. Features
For all Chaser-X models 100% Polyester Easily cleaned

Imperméable et respirante avec insert intégré Fermeture avec lacets, poche sur la langue pour stocker les lacets, caché des oeillets 2 paires de lacets livrés: 1 noir et 1 en contraste Facile à mettre grâce à une fermeture zippée sur la face interne Bande Velcro sur le devant pour un bon maintien de la cheville Semelle extérieure exclusive anti-dérapants Semelle intérieure antibactérienne Préformées pour s'adapter aux repose-pieds renforts internes et externes sur le renfort malléole et carbon-look sur sélecteur

Helmet Technology
Shell Design: A sleek European influenced shell design constructed using an advanced lightweight composite poly-alloy Face Shield: A flush-fit, quick release screw on face shield that is optically correct, compound-curved, scratch-resistant and protects against UV-rays Ventilation: 10 points of aerodynamically designed flush fit ventilation with chin, top, rear, and unique side extraction vents. 5 intake vents and 5 exhaust vents Inner sun shield: Smoke tinted inner flip down sun shield system with left side slide lever Visor: A removable and adjustable (40mm) screw-on visor 7 in 1: Helmet can be configured one of seven different ways. Ships with all parts included This helmet model meets or exceeds both ECE 22.05 and DOT FMVSS-218 motorcycle helmet safety standards Retention system is microlock (quick release) A clear coat finish to protect paint & graphics A large-size FX-55 weighs 1.68 kg or 3.69 lbs
Removable, washable and custom sizable Interior AFX helmet liners and cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable and washable. The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness and cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner and cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block.

Helmet Shell & EPS Size XS-M L-XXL



XS S M L XL XXL

Check Pad Thickness (mm) 40 36 32 28 24 20

Comfort Liner Thickness (mm) 12 10 8 10 8 6

Description:Nylon material, safe and non-toxicLightweight design, easy to carrySimple InstallationConcise designCompact and portable, its a useful to connect gopro and mount.Specification:Material : ABSCompatibility for GoPro HERO5 Session, GoPro HERO5, GoPro HERO4 Session, GoPro HERO4, GoPro HERO3+, GoPro HERO3, GoPro HERO2, GoPro HERO1,SJCAM,SJ4000, SJ5000, SJ6000, XiaoyiPackage Included:1 X Mount (camera is not inclued)

Feature:1.NON-SLIP: The black car seat cover really clings well to the car seat upholstery to keep the covers in place. That along with the straps and clips also ensures the front car seat cover stay put well2.PREMIUM PU LEATHER MATERIAL: Super soft and comfortable to touch,four seasons applicable.Waterproof and easy to clean.3.EASY TO INSTALL: Use straps with plastic buckles and sew it into the seat covers directly, the universal car seat covers are a breeze to install and will fit the majority of vehicles on the road. These car seat covers are also easy to clean; simply wipe it with wet towel. NO TOOLS REQUIRED4.CLASSIC DESIGN: PU Leather Car Seat Cover provide a fairly sleek look to your car and protect your seats from dirt, dust and stains, won’t decrease the value of your car for further damageSpecification:Set9 piecesMaterialArtificial leatherColorBrown, Gray, BeigeSizeSeat cover: 30 * 27cmFront seat: 118 * 56cmBackrest: 135 * 76cmRear seat cushion: 135 * 56cmPackageIncluded:5 X Seat Head Cover2 X Seat Front Seat1 X Backrest1 X Back Seat Cushion1 X Bag Of Hooks