Trim Ring Stereo Accent Cover For Harley Davidson Electra Street Glide Touring Chrome

Strike Gloves
Single layer, lightly padded Clarino® palm and thumb reinforcement Lightweight, breathable and flexible top of hand materials Pre-curved finger sidewalls provide a superior grip Silicone fingertips for increased lever control

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Feature:1.NON-SLIP: The black car seat cover really clings well to the car seat upholstery to keep the covers in place. That along with the straps and clips also ensures the front car seat cover stay put well2.PREMIUM PU LEATHER MATERIAL: Super soft and comfortable to touch,four seasons applicable.Waterproof and easy to clean.3.EASY TO INSTALL: Use straps with plastic buckles and sew it into the seat covers directly, the universal car seat covers are a breeze to install and will fit the majority of vehicles on the road. These car seat covers are also easy to clean; simply wipe it with wet towel. NO TOOLS REQUIRED4.CLASSIC DESIGN: PU Leather Car Seat Cover provide a fairly sleek look to your car and protect your seats from dirt, dust and stains, won’t decrease the value of your car for further damageSpecification:Set9 piecesMaterialArtificial leatherColorBrown, Gray, BeigeSizeSeat cover: 30 * 27cmFront seat: 118 * 56cmBackrest: 135 * 76cmRear seat cushion: 135 * 56cmPackageIncluded:5 X Seat Head Cover2 X Seat Front Seat1 X Backrest1 X Back Seat Cushion1 X Bag Of Hooks

Features
900D polyester material in main body for long durability Ergonomically pre-shaped construction for the perfect fit in the driver s position Quad-stretch (TM) front moves with the body on the bike Oversized Active-Stretch (TM) knee panels for unrestricted movement over knee orthoses or protectors Two-layered knees have a highly abrasion-resistant inner side with a heat and abrasion-resistant outer side of leather to prevent premature wear caused by knee braces or protectors Ventilated TPR logo on knee and thigh Fly-Cam closure at the waist

Urban Outdoor glove made of twisted polyester fabric, internal insulating layer in Thinsulate and ilining in microfleece. Closure with wrist strap. Touch screen on index. – heating system with 4-level adjustment button -Power system Dual Power allows you to use gloves with different types of power supply: Direct connection to a 12 volt source (motorcycle battery) – Connection to two 12-volt Li-PO batteries to be inserted into the glove cuffs- Connection to two 7.4-volt Li-PO batteries to be inserted into gloves cuffs for those activities that do not require a high heating intensity. inside Hypora membrane to make them completely waterproof. Features Connection type
Battery, Cable, Dual Power
Material
Hypora membrane, Polyester, Thinsulate, Touch screen index
Technical information
12 V - 37.0 W -3.2 AH 7.4 V - 15.0 W - 2.0 AH
Duration 12V
Level 1 (White) - 5:00 hours Level 2 (Blue) - 3:30 hours Level 3 (Purple) - 2:30 hours Level 4 (Red) - 2:00 hours
Duration 7.4V
Level 1 (White) - 6:00 hours Level 2 (Blue) - 4:30 hours Level 3 (Purple) - 3:30 hours Level 4 (Red) - 2:30 hours
Please remember, power supplies are not included!

BESCHREIBUNGKurze, mehrlagige Waterproof-Funktionsjacke für Touring und Freizeit.TECHNISCHE LÖSUNGEN100% waterproof Abnehmbare Innenmembran mit Verbindung aus 3D-Netz. Herausnehmbare Protektoren an Schultern und Ellbogen. Tasche für Back Protector Soft 141145 Größe 2. 4 Taschen vorne, davon 2 in Waterproof-Ausführung. 3 Innentaschen. Mit Klettverschluss regulierbarer Kragenverschluss und Manschetten. Doppelte, separate Taillenregulierung mit Klettverschluss. Anti-Flatter-System an den Ärmeln. Mit Reißverschluss regulierbare Belüftung vorne und hinten. Reflexbereiche vorne, auf Ärmeln und hinten. Dehnbarer Einsatz für Verbindung von Jacke/Hose mit Universal-Reißverschluss.