Libre
Soutien
MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr
The KLIM® Adventure Rally Air Pant redefines what fully-ventilated adventure gear can stand up to. Its high marks in abrasion and cut/tear resistance and impressive use of the new D3O® XERGO® line of integrated armor pieces ensures hot, humid and brutally abusive conditions have been tamed. The Adventure Rally Air Pant maintains high-end KLIM® pant features as well. Premium leather inner knees, reflective mesh materials, SuperFabric® slide zones on the knees and a sleek, simply adjustable boot cuff.
Features heavy duty Kevlar® mesh construction with amazing tear and abrasion resistance Kevlar® stretch mesh crotch for full range of motion Kevlar® seat panel large panels of Superfabric® Material at knees for better sliding abrasion resistance reflective mesh material placement on thighs and lower legs for increased low-light and dark-conditions visibility premium leather inside knees and inside lower leg provide excellent durability and heat resistance integrated armor system D3o® XERGO knee and hip pieces Poron® XRD⢠extreme impact foam coxic (tailbone) pad dow corning s7-005 Deflexion⢠on top of thighs for protection and breathability cargo, comfort and internals two external pockets: 2 large thigh pockets with horizontal zippers for easy access while seated one hidden money pocket in waist removable spot pocket on left thigh for proper position of spot antenna when seated for better tracking ability moisture-wicking mesh internal liner 500D Cordura® inner lower cuff boot buckle guard integrated suspender attachment points full circumference jacket-to-pants zip heavy duty YKK® zippers used throughout spacer mesh at knees for breathability and comfort adjustable over-the-boot cuff construction via Velcro® brand fasteners closure keeps pants securely in place and keeps weather out of boots adjustable cuff design allows pant to be open enough to adjust boot and knee guards/braces and provideds large range of adjustment to fit the widest range of boot styles/sizes
Specification:Horsepower:16HPPower Source:GasMPN: 845906 844041 844988 844039 305442 305445 846082Fitment:Fits for the following models:303442-1012-A1 303442-1017-A1 303442-1021-A1 303442-1027-A1 303442-1027-E1 303442-1027-E2303442-1027-E9 303442-1028-A1 303442-1028-E1 303442-1030-A1 303442-1030-E1 303442-1031-A1303442-1033-E1 303442-1033-E9 303442-1034-E1 303442-1034-E9 303442-1040-E1 303442-1047-A1303442-1047-A2 303442-1062-A1 303442-1066-A1 303442-1070-A1 303442-1072-A1 303442-1087-A1303442-1095-A1 303442-1095-E1 303442-1095-E9 303442-1107-A1 303442-1113-A1 303442-1114-A1303442-1116-E1 303442-1116-E2 303442-1116-E9 303442-1118-A1 303442-1124-A1 303442-1130-E1303442-1130-E9 303442-1131-A1 303442-1134-A1 303442-1134-E1 303442-1138-E1 303442-1148-E1303442-1158-A1 303442-1159-A1 303442-1169-E1 303442-1169-E9 303442-1172-E1 303442-1208-A1303442-1208-E1 303442-1218-A1 303442-1223-E1 303442-1223-E9 303442-1238-A1 303442-1238-E1303442-1238-E9 303442-1251-E1 303442-1275-E1 303442-1275-E9 303442-1277-E1 303442-1277-E9303442-1299-E1 303442-1299-E2 303442-1303-E1 303442-1327-E1 303442-1327-E9 303442-1343-E1303442-1343-E9 303442-1439-E1 303442-1439-E9 303442-1450-E1 303442-1450-E9 303445-1149-E1303445-1217-A1 303445-1345-E1 303446-1191-A1 303446-1434-E1 303446-1434-E9 303447-1008-A1303447-1023-A1 303447-1023-E1 303447-1025-A1 303447-1035-A1 303447-1036-A1 303447-1036-E1303447-1041-A1 303447-1048-E1 303447-1048-E2 303447-1049-E1 303447-1049-E9 303447-1054-A1303447-1055-A1 303447-1055-A2
The premier vintage jet helmet is an open face helmet that answers to the latest fashion and style requirements of the market. The Vintage is dedicated to those who want a fashion and cool city helmet, characterised by nice classic graphics, without forgetting about the safety requirements. The Vintage shell is made of a tri-composite mix, with dyneema, carbon and aramidic fibres. This is the same fibres mix that Premier uses on all its helmets. The internal shell is in EPS, moulded with differentiate density in order to offer the best shock absorption. The Jet Vintage has an easy-to-use internal sun visor which is placed between the internal and external shell. The inner liners are made with anti-allergic Sanitized fabric, and they re completely removable and washable.
Features Adjustable light tinted visor Quick release system Weight approx 990g ECE 22-05 approved Material: Dyneema-Carbon-Aramid-Fiber Lining: high quality, removable and washable
€Lady Glove in short sizes made of leather and textile mix
Features
soltoTEX® membrane with Tri-fleece inner lining Palm made of Clarino with double layer of leather Stretch leather on back of hand Fingers with double layer of leather Wrist stretch adjustable with Velcro Width adjustable cuffs with Velcro fastener Safety: fulfill the requirements of the directive N° 89/686/EEC
