Bahco 414 Bevel Edge Chisel 18mm 34

This robust mains powered jigsaw is perfect for site or workshop use. The soft grip handles and anti-splintering device means that you can use the jigsaw for extended periods with minimal discomfort. The Makita 4350CT Orbital Action Jigsaw features a quick release, tool-less blade change enabling you to continue work with a minimum of disruption. Variable speed control and an adjustable, sturdy base increase accuracy and control when cutting. The double insulated cable and robust all-metal gearbox means that this jigsaw should give you years of problem-free use.

The DeWalt DCM575 FlexVolt XR Chainsaw has a high efficiency brushless motor with automatic oiling for reduced maintenance. The tool free bar fitment and chain tensioning provides fast and easy chain adjustments. Uses a variable speed trigger so there is no pull starting and improved control during cutting. The extensive over-mould provides extra grip and comfort in prolonged use. Fitted with a 40cm Oregon bar and chain.

Stabila 196-2E Electronic Level with IP65 protection against water and dust. This professional quality level with electronic inclinometer is ideal for carpenters, joiners, kitchen builders, metalworkers, formworkers, construction engineers, pipe fitters and many more.The Electronic inclinometer has a dual display for accurate easy reading of inclinations in all positions. A second display located in the upper surface for easier reading of the measured value. With angle indication in degrees, percentage, mm/m, in/ft. Accoustic signal for horizontal and vertical measuring, audible inclination guide with three different signal tones allowing the user to arrange elements without having to look at the spirit level. With automatic switch off can be selected after 10min or 2 hours. As a spirit level it has extra long ribbed profile providing a high resistance to deformation during everyday use on site and a permanently moulded precision vials for overhead reading - no readjustment required. It has removeable endcaps for measuring flush into corners, a special coating to protect level against dirt and ruberised handholes for easier handling. Measuring accuracy of electronic module @ 0° and 90° 0.05° @ 1° and 89° 0.2° Measuring accuracy of spirit level: in normal position: 0.029° = 0.5mm/m, and in upside down position 0.029° = 0.5mm/m. Protection Class: IP65.Stabila 196-2 Electronic Spirit Level. Length: 600mm (24 in).

These Forgefix Phillips, single thread Drywall Screws have a black phosphate finish for increased durability. The screws come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. APPLICATION:Designed for fitting dry linings to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Drywall Screw Phillips Bugle Head SCT Black Phosphate 3.5 x 50mm Bulk 1000

The Faithfull 4-Sided 62mm replacment blade for use with the FAI WS624 wood scraper.

The DEWALT DCK694P3 Brushless 3 Speed 6 Piece Kit, contains the following: 1 x 18 Volt DCD995 Brushless XRP Hammer Drill with a tough three speed all metal transmission for increased runtime and longer tool life. Part of the intelligent XR Lithium Ion Series designed for efficiency and faster applications. Chuck: 1.5-13mm. No Load Speed: 0-450/0-1,300/0-2,000/min. Impact Rate: 0-7,650/0-22,100/0-34,000/min. Max Torque: 80Nm. Drilling Capacity Wood: 50mm, Steel: 13mm,Masonry: 16mm. 1 x 18 Volt DCF886 Brushless Impact Driver with brushless motor technology, aluminium front housing and an ergonomic handle. 3 LEDs provide work piece illumination. With 'drop in' keyless hex driver for a quick, one-handed fitment. Bit holder: 6.35mm (1/4in) hex.No Load Speed: 0-2,800/min.Impacts Per Minute: 0-3,200/bpm.Max Torque: 165Nm.Capacity: Bolt M12. 1 x 18 Volt DCS391 Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. No Load Speed: 3,700/min.Max Cutting Depth: @90°: 55mm, @45°: 55mm.Blade: 165 x 20mm bore.Weight: 3.8kg. 1 x 18 Volt DCG412 Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg. 1 x 18 Volt DCS331 Jigsaw has a keyless blade change and intelligent variable speed trigger. Accepts T-shank blades. Strokes at No Load: 0-3,000/min.Levels of Pendulum Stroke: 4.Stroke Length: 26mm.Capacity: Wood: 135mm, Metal: 10mm. 1 x 18 Volt DCL040 LED Pivot Light has a compact, lightweight design with impact resistant housing and improved ergonomic design and rubber grip for increased comfort. The LED Bulb produces 110 Lumen output (10,000Hr Life) with a 2 zone light pattern. The flashlight head pivots more than 90º vertically with ratchet lock. 1 x 10.8-18 Volt DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LEDindicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-Ion DEWALT Slide Pack 10.8, 14.4, and 18 Volt batteries. Supplied with 3 x 18 Volt 5.0Ah Li-Ion Batteries and 2 x DS300 Tough System Kit Boxes.