The ALM Manufacturing Metal Blades to suit various Flymo models.The ALM Manufacturing 33cm (13in) FL332 Metal Blade to suit: Flymo: Hover Compact 330, Compact 330. Compares to FLY027.
This R.S.T. London Pattern Brick Trowel has a durable hardened steel blade. Its handle is soft-touch to enhance user comfort. The traditional London pattern is the standard shape for laying bricks.Size: 280mm (11 inch).
These Zarges Aluminium Loft Ladder, two and three section aluminium loft ladders are available. With D shaped rungs for maximum comfort, and a universal stowing pole. The three section model comes with a hand rail. Easy to assemble and fit and supplied with instructions. Conforms to EN 14975 standards, 150 Kilo rating.No of sections: 3.Floor to floor height: 2,133 - 3,000mm.Floor opening size: 381 x 400 - 463mm.Minimum loft clearance arc: 710mm.Minimum storage length: 1,120mm.
High sanding capacity, little clogging and long service life guaranteed thanks to corundum abrasive grit and full bonding with artificial resins. For universal use on virtually all materials. Perforated, for use with perforated sanding pad and dust extraction, hook and loop fastening.
Paslode IM350+ Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.FINISH: All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.Bright: Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating.Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15µm.Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50µm Stainless Steel : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.SHANK: Smooth Shank: The standard nail, offering high shear value and lowest withdrawal resistance. Fixing across the grain. Fixing into end grain. Clenching applications. Specification - Number of centres will vary with shank diameter.Unilock Shank : Increases withdrawal resistance. Drives easier than ring shank fixing across the grain. Specification - The ringed parts have 24 rings per inch.Ring Shank : Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification.HEAD TYPES :Round Head : The head area is designed to maximise resistance to the head being pulled through Specification - Head size between 2.0 and 2.5 times wire diameter according to EC5Clipped Head : Increases number of nails per strip. The head area is designed to maximise resistance to the head being pulled through Specification - Head area corresponding to full round head area, according to EC5
