Faithfull Centre Punch 14in - Square Head

RIDGID Tongue & Groove (Slip Joint) Pliers feature a flush rivet design which provides a stronger tool and allows access to tighter areas. The pliers have been forged and heat-treated for extended life and durability. Professional quality tools, precision crafted for ultimate balance, high strength and exacting performance. They are fitted with cushioned grips that are designed for comfort only. They are NOT intended as insulation against electric shock.RIDGID 734 Tongue & Groove Pliers Length: 254mm (10in).Capacity: 51mm (2in).Weight: 0.40kg.

The ForgeFix Dome Head Rivet has a steel-plated stem and Aluminium head which provides a neat appearance with a low profile. This rivet is the most versatile and commonly specified head style. The dome head has a diameter double that of the rivet body providing more than sufficient bearing surface to retain all but the extremely soft or brittle materials.The rivet assembly is inserted into a hole drilled through the parts to be joined together and can be finally fixed by use of a hand held or pneumatic rivet gun.

Faithfull peg tooth bowsaw blade for general cutting work in dry wood, and green wood suitable for gardeners, builders, farmers and D.I.Y. Suitable for use in most types of bowsaw in the UK market.1 x Faithfull Bowsaw Blade 755mm (30in)

The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.

These Forgefix Spring Lock Washers ring-shaped, split at one point and bent into a helix. This shape means that the washer exerts a spring force between the fastener's head and the base item. The main purpose of the Spring Washer is to prevent loosening of the fastener by either movement or vibration.These washers are bright zinc plated for increased corrosion resistance. APPLICATIONIdeal for all manner of bolting applications where movement or vibration may cause loosening. Typical examples would be engineering and machinery.Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Spring Washers ZP M8 Bag 100

The design enables these Tool Clips to be used in a wide variety of applications to either display, hold or store a number of items including tools, brooms, rails etc... CT pattern tool clips, bright zinc plated. Sizes available: from 1/4in to 1.1/2in diameter.Size: 1/2inSupplied in packets of 25 clips