The Halls Handiburr Rethreaders are based on a high-speed steel tap permanently fitted with a handle. They are designed principally for cleaning out the fixing holes in socket switches or conduit boxes as these often have malformed threads or are blocked by plaster or cement. The Halls HB11 Handiburr Rethreader has the following specification: Size: M3.5 x 0.6.
The Stanley FatMax Parallel Tip VDE Insulated Screwdrivers have a VDE insulated screwdriver tip that is individually tested to 10,000 volts and guaranteed to 1,000 volts. The soft-grip handle gives the perfect combination of great grip plus reduced fatigue and its large diameter offers greater torque needed for driving wood screws. The handle is moulded directly to the bar giving a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current.Stanley FatMax VDE Insulated Screwdriver Parallel Tip has the following specification: Tip Size: 2.5mm.Blade Length: 50mm (2in).
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S
Liberon Stone Floor Wax is ideal for protecting and nourishing stone, slate, terracotta, quarry tile and other natural and man made stone floor products after sealing with Liberon Stone Floor Sealer. The slip resistant finish enhances the natural colour of the stone while giving a beautiful soft lustre to the surface. Stone Floor Wax will help to prevent staining and is resistant to scratching and scuffing. Made from a carnauba wax base. Endorsed by the Guild of Master Craftsmen. Coverage: 10-12m² per litreDrying time: 3 hoursApplication: Brush or clothUsage: InteriorLIBSFW25L Liberon Floor Wax has a volume of 2.5 litres
These Facom 12-point OGV sockets have a 1/2 inch drive to fit 1/2 inch ratchets. They are high quality and ideal for tightening and loosening bolts, nuts and other fasteners.The sockets are available in a range of metric sizes.Performance: conform to ISO 2725-1, DIN 3124 and NF ISO 2725-1.The FCMS15 socket has the following specifications:Socket size: 15.0mm.Length: 36mm.Weight: 60g.
