Saw Table Saw Slot Ajustador Mortaja y herramienta Tenon Medición móvil Longitud del bloque Compensación Herramientas para trabajar la madera

The Moore & Wright Spring Dividers are manufactured from polished tool steel and the points are hardened to over 550Hv. The bow spring ensures uniform tension over working range and they are fitted with a centrally mounted adjustment screw. These Spring Dividers comply with BS3123 standards. Note: The nominal size is the distance between the centre of the roller and the working ends of the legs.The Moore & Wright 504 Spring Divider has the following specifications: Size: 100mm (4in).

ABUS 55 Series solid brass body padlock with the inner components made from non-corrosive materials. Pin tumbler cylinder with anti-pick mushroom pins which resists picking, a hardened steel shackle which resists hacksaw attacks and is double bolted 30mm and above for increased shackle strength. Long shackle (HB) version available : For most security needsOverall width: 38 mmOverall height: 60 mmOverall depth: 13 mm Shackle width: 20.5 mm I.D.Shackle height: 21.5 mmShackle Dia: 6.5 mm

Paslode IM65 chisel point brads for Impulse IM65 F16 gas brad nailer. Electro galvanised light duty protection F16 gauge lost head 1.65mm wire brads glued, supplied with Paslode Special Impulse gas fuel cells which drives up to 1,000 brads per cell.Electro Galv: Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.

Gas Fuel Cell Pack for use with the HiKOKI NR90GC Framing Nailer. 1 x Single Pack.

The DMT D9 Diamond sharpening bench whetstone has non-slip feet and will not break, chip, crack, hollow or groove. The D6 whetstone is made from the hardest material which is one of the most efficient sharpening abrasive. Available in unique interrupted surface and continuous surface, light pressure produces a sharp edge with just a few strokes. Use water for lubrication no oil, smell or mess and can hone ALL hard materials: carbide, steel, etc. and is supplied with Non-skid mat. Precision, continuous monocrystalline diamond bench whetstones with rubber feet. The grit size is etched into the side of the whetstone. The grits are denoted by a dual coloured circle which is set into one end. Blue: Coarse Grade 325, 45 micron.Red: Fine Grade 600, 25 micron.Green: Extra Fine Grade 1200, 9 micron.Red: Fine 600g, 25 micron

The DeWalt DCS576 Flexvolt XR Circular Saw is ideal for general purpose ripping, cross-cutting and bevelling in wood and other construction materials. The high torque motor provides increased durability and power when cutting job site and joinery materials. It has a durable construction with optimum balance for safe, fatigue-free operation. With a scale for setting a precise cutting depth of up to 61mm and variable adjustment of the bevel angle up to 57°. There is also an additional handle for safe two-handed work. Guide rail compatible for quick and easy use with the DeWalt guide rail system.