Knipex ESD Electronics Pliers Pointed Round Jaw Pliers 35 32 115

The Zarges K470 Aluminium Case is a high-quality aluminium universal box. The lid has a stainless steel hinge strip, two lid straps and foamed seal all round. The case has cast-aluminium stacking corners, and a high level of stability due to 3 fully-welded aluminium profile frames. Ergonomic and durable, it has C fasteners for at least 20,000 operating cycles, and profile-section joints that are fully welded. The snap fasteners can be secured with a plug lock, have lead seals, and provide protection against bursting open. They can also be sealed by a padlock (Max shackle thickness 6mm). Ergonomic handles provide comfortable handling, with loads of up to 50kg. Also has ergonomic heavy-duty sprung drop handles. The clearance dimensions are approximately 30mm less than the inside dimensions. All-round beading and corner beads give even more durability. Comes in 11 standard sizes. Customised sizes available.Zarges K470 Aluminium Case. Internal length: 550mm. Internal width: 350mm. Internal height: 150mm. External length: 600mm.External width: 400mm.External height: 180mm. Volume: 29 Litres. Weight: 4.2kg.

The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.

The reverse twin wire hook offers twice the strength of an ordinary bungee and the rounded hook eliminates the risk of scratching.The reverse hook bends away allowing more room to attach.TUV certified.Packs of 2.The MasterLock Twin Wire Bungee Cords have the following specification: Length: 120cm.Diameter: 8mmResistance Limit: 40kg.Colour: Dark Blue.Quantity: 2 Piece.

The Dormer P805 Solid Carbide Rotary Bright Burr with ball nose geometry for skip flute grinding and increased strength at the centre. With a reduced chance of swarf congestion and improved cutting action closer to the centre. Produces double cuts, making it first choice for general machining. With an improved ease of control, increased metal removal rate and breaks swarf into manageable pieces. They have toughened and hardened steel shanks that provide rigidity and strength. This prevents bending and reduces vibrations for an improved tool life. Ground to h6 (Carbide) and h7 (Steel). Excellent impact strength that is able to withstand high forces and to withstand higher temperature without failing. Special brazing elements provide excellent braze strength.The Dormer Solid Carbide Bright Rotary Burr Ball Nosed Cylinder has the following specification: Diameter: 6.3mm.Shank Diamter: 3mm.Working Length: 12.7mm.Overall Length: 45mm.

The Rawplug Projecting Rawlbolt is suitable for heavy-duty metal fixing in which large bolts are anchored in a metal housing or shield for securing heavy items in concrete. Ideal for overhead and ceiling work, securing cable trays, ducting and trunking or installing radiator brackets, partitions and structural fixtures.Size. M10 x 60mm.Mximum Fixture Thickness: 60mm

Metric combination spanners offset at 15° - DIN 3113A. Manufactured from chrome vanadium steel with a satin finish.Size 6mm.Length 100mm.