Libre
Soutien
These Forgefix General Purpose Pozidrive Screws with Countersunk heads are zinc plated for increased durability. They are an extremely popular general purpose screw, and suitable for use in and with many materials. APPLICATION:Ideal for use in many ironmongery, electrical and plumbing applications.Can be used with various screw cover caps. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have twin threads, which enable an easy start when driving. Imperial Size > MetricNo.4 = 3.0mm, No.6 = 3.5mm, No.7 = 3.9mmNo.8= 4.0mm, No.10 = 5.0mm, No.12 = 6.0mmGeneral Purpose Pozi Screw Countersunk TT ZP 1.3/4 x 7 Box 200
Masajeador muscular eléctrico de 12 V Percusión portátil Vibrante Pistolas de masaje potentes Masajeador muscular de tejido profundo de mano para cuello Espalda Hombros Pie pierna
The Faithfull Long Leg Tile Spacers are ideal for most tiling applications. These versatile spacers can be easily snapped when ‘T’ joints are required and may be easily removed once the adhesive is set. How to use: Apply adhesive with a notched edge spreader and secure tile firmly. Position one spacer at each corner of the tile, add more spacers as each new tile is placed alongside. For evenly spaced wall and floor tiles, always use same spacer brand and product code during tiling process. Tiles must be left to set for 24 hours before grouting. Faithfull recommend removing spacers once tile adhesive has set. Please note: Size of spacer may vary slightly to dimension stated. Always use same spacer brand and product code during tiling process as each brand and product is different.Size: 3mm.Pack: Tub of 1,000.
These Forgefix Plasterboard Spring toggles have an all-metal constuction, making them ideal for applications where heat resistance is required. Their wide span wings spread load, ensuring an increased holding capacity. They have excellent holding in lathe and plaster applications.The toggles are quick and easy to use, with no requirement for specialist tools. APPLICATION:Light to medium-duty fixing for all manner of fixtures including bathroom accessories, shelving, lighting, radiators and much, much more.Plasterboard Spring Toggle M5 x 100 Bag 10
E-Magnets Shallow pot magnets are low profile for applications where height is limited. They have a clearance hole through and a countersink on the magnetic face to accept a countersunk screw. Maximum operating temperature: 500°C.Material: AlnicoThe E-Magnets 827 Shallow Pot Magnet has the following specifications: Diameter: 29mm (1.1/8 inch). Height: 9mm (11/32 inch). Maximum Pull: 5kg (11 lb).
The Milwaukee® M12 CID Fuel™ 6.35mm (1/4in) hex Impact Driver has 2 modes to cover a number of applications. Mode 1 (0-1,200 rpm, 19Nm torque) is ideal for precision work, whereas Mode 2 (0-2,650rpm, 135Nm torque) delivers maximum performance for the toughest applications. It also has a bright LED light to illuminate the workspace. Designed to out-perform other heavy-duty power tools, it has POWERSTATE™ brushless motors for up to 10 times longer motor life. REDLINK PLUS™ intelligence, providing total system communication with overload protection to increase the tool's life. REDLITHIUM-ION™ battery packs are highly durable and feature a fuel gauge to display the remaining charge. Individual cell monitoring in the battery optimises tool run time. M12 CID-202C: 2 x 12v 2.0Ah Li-Ion Batteries. M12 CID-0: Bare Unit, No Battery or Charger. Specification Bit Holder: 6.35mm (1/4in). No Load Speed: 0-1,200/0-2,650/min. Impact Rate: 2,700/3,550/bpm. Max Torque: 19/135Nm.