The Teng Tools Mega Bite range of Pliers have been designed to ensure the highest quality and optimum functionality. The overall length of the pliers gives a maximum leverage to suit the pliers function. These Teng Tools Side Cutting Pliers are suitable for heavy-duty applications and allow up to a 72 degree cutting angle. They are manufactured from high carbon steel, with Titanium coated joints for excellent strength and durability. For a comfortable grip, the pliers have Vinyl-coated handles. The TENMB442 Mega Bite Side Cutting Pliers have the following specifications:Length: 200mm (8 inch).Cutting capacity piano wire: 2.5mm.Cutting capacity Steel wire: 4.0mm.
Pin vices are chiefly used for holding small taps, reamers, scribers or wire. The handles are tubular which permit holding wires of any length or diameter up through the length of the tool.Size: 1Capacity: 0 - 1mm (0 - 3/64 in)
The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.
3867/1 TS TORX® Bits, stainless Wera Stainless Torsion slotted bits prevent rust on stainless steel fixings caused by contamination from conventional steel tools. Vacuum ice-hardened to the same strength as conventional steel tools, and so suitable for tough, industrial use. Wera Stainless bits feature a unique Torsion zone, extending bit life over standard bits.Use wit Wera stainless Rapidaptor bit holder.Application: For TORX socket screws.1/4in Hexagon Drive, DIN 3126-C 6,3, ISO 1173Tip: TORX, stainless steel.
