Libre
Soutien
The ABUS 65 Series open shackle brass padlocks have a body which is made from solid brass, hardened steel shackle up to 30mm and hardened steel alloy shackle 40mm and above. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. They are suitable for low to medium security requirements and are also suitable where a strong requirement for service performance and longevity is required. The padlock locking is automatic, it does not require a key.The cylinder can be re-keyed to match an existing key (Keyed Alike). Overall width: 20 mmOverall height: 34 mmOverall depth: 10 mm Shackle width: 9.5 mm I.D.Shackle height: 11.5 mmShackle Dia: 3.5 mm
16 gauge finish nails, which are compatible with: Tacwise Air Powered Nailers: DFN50, DFN50WHH and FFN64LHH.Tacwise Battery Powered Nailers: Ranger 2 16G Nailer.And all other nailers that take 16g straight finish nails.
The Knipex Pliers Wrench XL acts as pliers and a wrench in a single tool. This unique installation tool is suitable for opening widths up to 85mm (3.3/8in). It acts as an adjustable tightening tool and is ideal for large screw joints, with pressure-sensitive surfaces such as plastic, copper, brass, stainless steel and chrome. It is also excellent for gripping, holding, pressing and bending workpieces. It has smooth jaws, for damage free installation of quality union joints made from brass, red brass or stainless steel. The zero backlash jaw pressure prevents damage to edges of sensitive components. The tool allows adjustment at the touch of a button directly on the workpiece, The parallel jaws give a more solid grip. The construction gives infinite adjustment of all widths up to the specified maximum size. The pliers wrench ensures reliable catching of the hinge bolt with no unintentional shifting. The action of the jaws allows quick tightening and release of bolted connections using the ratchet principle. It has a lever transmission greater than 10:1 for strong gripping power. The pliers wrench is made from chrome vanadium electric steel, which is forged and oil-hardened. It conforms to DIN ISO 5743. Open-end wrenches with fixed opening widths are expensive, especially when used for large union joints. The KNIPEX Pliers Wrench XL, with its adjustable jaw offers enormous savings potential. Specifications: Capacity: 85mm (3.3/8in).Length: 400mm.Adjustment positions: 25.
The Blue Spot Fine Thread G Clamps have a fine thread with reinforced shoulders for strength. They have a malleable cast iron frame, a tommy bar handle and swivel shoe.Size: 102mm (4 inch).
Paslode IM350+ Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.FINISH: All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.Bright: Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating.Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15µm.Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50µm Stainless Steel : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.SHANK: Smooth Shank: The standard nail, offering high shear value and lowest withdrawal resistance. Fixing across the grain. Fixing into end grain. Clenching applications. Specification - Number of centres will vary with shank diameter.Unilock Shank : Increases withdrawal resistance. Drives easier than ring shank fixing across the grain. Specification - The ringed parts have 24 rings per inch.Ring Shank : Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification.HEAD TYPES :Round Head : The head area is designed to maximise resistance to the head being pulled through Specification - Head size between 2.0 and 2.5 times wire diameter according to EC5Clipped Head : Increases number of nails per strip. The head area is designed to maximise resistance to the head being pulled through Specification - Head area corresponding to full round head area, according to EC5
The ABUS 70IB Series Marine grade padlocks have a solid brass body sealed in a protective vinyl cover with drainage channels to protect the cylinder against water and dirt. The shock absorbing vinyl casing prevents damage to polished surfaces. They have a precision pin tumbler cylinder with a stainless steel shackle and rust-free internal components for medium security requirements in severe weather and environmental conditions, ideal for securing to vehicles and boats. The inside parts are made of 100% rust-proof materials and have drainage grooves to carry off penetrating water. They also feature a double bolted shackle and a self locking cylinder. Codes ending LSC indicate a long shackle. Keyed alike available.ABUS 70IB/50HB80 50mm Brass Marine Padlock 80mm Stainless Shackle Keyed 6401