Foldable Kitchen Faucet Cold Water Only, Rotatable Kitchen Brass Taps Chrome Single Handle One Hole Kitchen Sink Faucet Lightinthebox

Kit de ventana ajustable Adaptador de placa + ventana para aire acondicionado portátil

These Forgefix Pozi Carcass Screws have an extremely coarse single thread. The have a black phosphate coating for increased durability and a self drill point for easy installation. APPLICATION:Designed specifically for chipboard and MDF (medium density fibre) board and carcass assembly. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Coarse thread screws have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Carcass Screw Pozi SCT Black Phosphate 4.2 x 45mm Box 200

The ALM Manufacturing QT039 Drive Belt fits: Qualcast: Turbotrak 35. Compares to: L57302, FO16-L57302.

Hammerite "Direct to Rust" Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3-in-1 formula, there is no need to use a primer or undercoat...saving you precious time! It forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion-resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. The paint has a subtle hammered effect with a metallic sheen, and protects up to 8 years. Two coats are required. Specification: Colour : Black Finish : Hammered Size : 2.5L Coverage : 5m²/L

The Makita HP2071F Percussion Drill is fitted with a high power motor but packed into a slender and compact body with durable metal gear housing (with a keyless chuck). The new reversing system allows extended service life of carbon brush and no power reduction even in reverse rotation. It is fitted with a torque limiter, the drill stops when the bit hits against reinforcements. It is supplied with a side handle, depth stop and a carry case. Specification: Input Power: 1,010W No Load Speed: 0-1,200/0-2,900/min Impact Rate: 0-24,000/0-58,000/bpm Capacity: Steel 18mm, Masonry 20mm, Wood 40mm Weight: 2.4kg Vibration Hammer Drilling : 16 m/sec² Vibration K Factor : 1.5 m/sec² Noise Sound Pressure : 99 dB(A) Noise Sound Power : 110 dB(A) Noise K Factor : 3 dB(A)

The Weller 18 Volt WHS40 Temperature Controlled Solder Iron has a temperature range of 200 - 450°C and eliminates the risk of heat spikes commonly associated with stations without temperature control. Equipped with an 18 Volt low voltage iron with an ergonomic handle, allowing the user to comfortably get closer to the job at hand. Specification Input Power: 18 Volt.Temperature: 200-450°C.Tip: T0054321199, S32 Solid Longlife Tip 2.mm, SI15/SPI16.Weight: 1.48kg.