Irwin Snub Nose Bi-Metal Safety Knife Blades Pack of 5

The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.

The ABUS 92 Monoblock shutter padlocks have a solid brass body encased in hardened steel jacket and a through hardened steel alloy shackle which rotates when attacked. 5 Pin precision cylinder with anti-pick mushroom pins and rustfree components. A hardened steel pin protects the narrow side of the lock against sawing and the deadlock mechanism requires a key to lock. NANO PROTECT™ Chrome Plating, Hardened steel and through hardened steel alloy shackles get the most effective protection available, where smallest nano particles close the smallest gaps found in the normal chrome plating 'making rusty shackles a thing of the past' 1,000 hours salt bath test, the equivalent of 40 years in a harsh environment proves the durability of the NANO PROTECT™ process.Overall width: 67 mmOverall height: 58 mmOverall depth: 28 mm Shackle width: 33 mm I.D.Shckle height: 14 mmShackle Dia: 10 mm

The two handle arrangement provides good balance and control, it can also be used single handedly. It's powerful 1,010 Watt motor gives fast, efficient removal of material in a variety of applications. The integrated dust container provides efficient dust collection, the sander is also AirLock compatible. The top exit cordset keeps the cable away from belt area preventing interference with sanding operations. Supplied with a dust container.

Type:Pull-out / ­Pull-down; Style:Contemporary; Finish:Electroplated; Faucet Type:Kitchen faucet; Installation Type:Centerset; Valve Type:Ceramic Valve; Faucet center(Inches):0-1; Handle Material:Chrome; Batteries Included:No; Drain Included:No; Installation Holes and Handles:Single Handle One Hole; Features:FaucetSet; Shipping Weight:1.555; Net Weight:0.000; Listing Date:03/09/2020; Special selected products:COD