Pin vices are chiefly used for holding small taps, reamers, scribers or wire. The handles are tubular which permit holding wires of any length or diameter up through the length of the tool.Size: 1Capacity: 0 - 1mm (0 - 3/64 in)
The Bosch Construct Timber Saw Blades are designed for Construction Site Timber which might include concrete residues or nails within the timber. Technical Specification: Blade Diameter : 190mm No. of Teeth : 12 Bore Size : 30mm Tooth Pitch : 2.6mm Tooth Shape : 12° POS Rake Max Rotation Speed : 8,000RPM
These Faithfull professional, high quality Combination Spanners are forged from chrome vanadium steel, which is hardened, tempered and satin chrome plated for corrosion protection. Manufactured to DIN 3113 standards. The broached jaws and rings ensure a consistent tolerance and a guaranteed accurate fit. Both the jaw and ring end are set at a 15 degree offset for ease of use in awkward positions.Size 22mm
The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.
DFN50V pneumatic finish nailer fires 16 gauge finish nails 20-50mm in length. It has a 360° exhaust, no mar tip, rubber comfort grip and high durability driver blade system. Ideal for joinery, exhibitions, furniture & construction. Load Capacity: 100 BradsStaple Type: 16 Gauge Nails 20-50mmTrigger: Contact Trip (bump)PSI/dBA: 70-120 / 86Weight: 1.7kg
