Bahco S4RM3T Reversible Ratchet Spanner Set

The Wera Slotted 160i VDE insulated screwdrivers are tested individually for dielectric strength under a load of 10,000 volts so as to ensure safe working with loads up to 1,000 volts. They have a premium lasertip which is a laser roughened surface that literally bites into the screwhead, reducing cam out. With patented ergonomic, multi component Kraftform handle which uniquely fits to the shape of the hand during screwdriver use. Please note: WER006100 does not have a Lasertip.Blade Length, 150mmTip, 6.5mm

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S

Monument Flat Tap Reseater Cutter to fit models 450, 455, 454, 458 and 460 Tap Reseating Tools.1 x Monument 502A Spare Flat Tap Reseater Cutter 17mm (11/16in)

The Makita HP2071F Percussion Drill is fitted with a high power motor but packed into a slender and compact body with durable metal gear housing (with a keyless chuck). The new reversing system allows extended service life of carbon brush and no power reduction even in reverse rotation. It is fitted with a torque limiter, the drill stops when the bit hits against reinforcements. It is supplied with a side handle, depth stop and a carry case. Specification: Input Power: 1,010W No Load Speed: 0-1,200/0-2,900/min Impact Rate: 0-24,000/0-58,000/bpm Capacity: Steel 18mm, Masonry 20mm, Wood 40mm Weight: 2.4kg Vibration Hammer Drilling : 16 m/sec² Vibration K Factor : 1.5 m/sec² Noise Sound Pressure : 99 dB(A) Noise Sound Power : 110 dB(A) Noise K Factor : 3 dB(A)

Self-supporting motor with vibration decoupling for outstanding vibration and noise reduction. Very easy to handle due to its ergonomic design and light weight. StarlockPlus tool mounting with outstanding torque transfer, suitable for all Starlock and StarlockPlus accessories. Powerful Li-ion batteries with SafetyCell technology. Charge indicator on each battery. Wide range of accessories available for all applications.

This Forge Auto Gate Latch will automatically latch when the gate is pulled to the closed position. Ideal for gates in fields where easy access is preferred over security. Also used widely for garden gates. Supplied with all fixings and fitting instructions. Fitting Instructions:1. Position the keep on the fence post and mark the fixing holes with a pencil. Drill pilot holes with a Ø2mm drillbit and fasten in place using screws provided.2. with the gate closed, position the latch arm so that it is engaged in the lock and screw into position using the fixings supplied.Finish: Black Powder coated.