Teng 600550 Combination Spanner 50mm

These Facom 12-point OGV sockets have a 1/2 inch drive to fit 1/2 inch ratchets. They are high quality and ideal for tightening and loosening bolts, nuts and other fasteners.The sockets are available in a range of metric sizes.Performance: conform to ISO 2725-1, DIN 3124 and NF ISO 2725-1.The FCMS15 socket has the following specifications:Socket size: 15.0mm.Length: 36mm.Weight: 60g.

Hammerite "Direct to Rust" Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3-in-1 formula, there is no need to use a primer or undercoat...saving you precious time! It forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion-resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Two coats are required and protects up to 8 years. Specification: Colour : Yellow Finish : Smooth Size : 2.5L Coverage : 5m²/L

Faucet Finish:Antique Brass; Style:Antique; Faucet Body Material:Brass; Material:Brass; Shipping Weight:0.400; Net Weight:0.000; Listing Date:03/16/2021; Sub Categories:Faucet; Special selected products:COD

Blue Spot 01535 1/4 and 3/8 in Drive metric and AF socket set 40 piece consisting of:-12 x 1/4 Hex sockets 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32 and 1/2 AF.13 x 1/4 Hex sockets 4, 4.5, 5, 5.5, 6, 6.5, 7, 8, 9, 10, 11, 12 and 13mm.3 x 1/4 8 Pt sockets 1/4, 5/16 and 3/8 in1 x 1/4 Spinner handle 6 in1 x 1/4 to 3/8 Adaptor3 x 3/8 Hex sockets 7/16, 9/16 and 1/2 AF3 X 3/8 Hex sockets 11, 12 and 13mm 1 x 3/8 Reversible ratchet handle.1 x 3/8 Extension bar 3 in1 x 3/8 Spin disc1 x moulded case

Crisol de grafito fundido de alta pureza para herramientas de fundición de metal dorado y plateado de alta temperatura

Forgefix Hex Flange Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The flange head acts as a fixed washer, distributing the load under the bolt head. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.Specifications: Size: M6 x 75mm.Pack quantity: 100.