Teng 920617 Deep Impact Socket 17mm 12in Drive

Three individual Faithfull folding key sets covering the most commonly use Metric, A/F and Star keys. These professional quality keys are manufactured from fully hardened chrome vanadium steel and supplied in a non-slip soft-grip coated case with each case clearly marked with the key size for easy identification. The set includes the following sizes:Metric: 1.5, 2, 2.5, 3, 4, 5, 6, 8mm.A / F: 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 in.Star: T9, T10, T15, T20, T25, T27, T30, T40.

The DMT D9 Diamond sharpening bench whetstone has non-slip feet and will not break, chip, crack, hollow or groove. The D6 whetstone is made from the hardest material which is one of the most efficient sharpening abrasive. Available in unique interrupted surface and continuous surface, light pressure produces a sharp edge with just a few strokes. Use water for lubrication no oil, smell or mess and can hone ALL hard materials: carbide, steel, etc. and is supplied with Non-skid mat. Precision, continuous monocrystalline diamond bench whetstones with rubber feet. The grit size is etched into the side of the whetstone. The grits are denoted by a dual coloured circle which is set into one end. Blue: Coarse Grade 325, 45 micron.Red: Fine Grade 600, 25 micron.Green: Extra Fine Grade 1200, 9 micron.Red: Fine 600g, 25 micron

Theme:Animal; Style:Modern; Material:Polyester; Features:Adorable,Machine wash; Shipping Weight:0.155; Net Weight:0.155; Listing Date:12/20/2020; Production mode:Self-produce; Size:25251

100 Series hasp and staple with concealed hinge pin and concealed screw heads, corrosion protected. Only the carded versions include fixings. 100/80 and 100/100 have hardened steel staples. Where to use it: Designed for doors closing flush, i.e. door leaf and door frame are level DG versions: with double joint designed for doors not closing flush, i.e. door leaf and door frame are not level, and corner solutions.Hasp length: 60mmHasp width: 20mmStaple bore dia: 7mm

Nut Splitters are used for removing rusted on nuts from studs etc.A spanner is used to turn the hexagon end which has the effect of forcing the chisel end into a flat of the nut, forcing apart without damage to the thread of the stud.Size 19 to 27mm

Disston Screwdiggers fulfil the same function as Screwsinks but the countersinking part can be slid up and down the drill part of the tool.Ideal for drilling, countersinking and counterboring in one operation.This means that a No.8 Screwdigger can be adjusted to predrill for different lengths of No. 8 Screw.Uses 7/64in Drill Bit.To ensure an acurate fit we suggest you use the same Plug Cutter from the Disston brand.For No 8 screw