Bahco 424-P Bevel Edge Chisel Set of 6 In Roll 6,12,16,22,25 32mm

Fisco Combination Square set for use outside and inside as a try square, mitre square, depth and marking gauge. It has a lightweight zinc stock and the rule has ground edges and ends. The centre head enables the accurate location and marking of the centre of circular items. The graduated protractor head can be turned through 360° for measuring and constructing angles. Size: 300mm/12in.

Cómodo organizador de células de almacenamiento portátil con probador Kit de bricolaje de caja de caja de soporte portátil

Extraíble Organizador de Celdas Portátil Almacenamiento Con Caja de Caja de Comprobador de Celdas Caja de Comprobador de Celdas DIY Kit Pantalla LCD BT-168D

Stabila Spirit Level 2 Vial, is a smooth-ribbed box section spirit level, the ribbed profile provides extra strength preventing the profile from bending. This spirit level can be used to check the horizontally of overhead surfaces by turning it and its horizontal vial upside down. You can then measure precisely from underneath.1 vertical vial and 1 horizontal vial. Measurement accuracy: in the normal position 0.029° = 0.5 mm/m. For overhead measurements: 0.043° = 0.75 mm/m. Stabila patent. Vials that are moulded in.Stabila 80AN Level 2 Vial.Length: 1000mm (40 in).

The Faithfull traditional lead dresser manufactured from straight grain seasoned Beech timber. It has rounded corners and a raised handle grip to give plenty of knuckle room when hammering or shaping a large range of ductile materials. Weight: 375g.Face Dimensions: 50 x 170mm (2 x 6.3/4 in).

The ABUS KE60 Euro profile thumbturn cylinders are suitable for wooden, aluminium & most uPVC doors. They have precision, mushroom pin and paracentric keyway which offer comprehensive anti-pick protection, also they have a hardened steel anti-drill spring & pin protection with 8 anti-drill pins in every keyway. How to measure a Euro Profile Cylinder: A Distance from internal end of cylinder (Not the thumbturn) to centre of camB Distance from external end of cylinder to centre of cam Thumbturn Cylinders, Measurement K is always the thumbturn side of the cylinder, and the other measurement Z is external.