Kostenlos
Unterstützung
The Bosch S922EHM Blades are part of the "Endurance for Stainless Steel" range. - Carbide Technology & Teeth Ground - For Inox / Stainless Sheets (2-4mm), Inox / Stainless Profiles (up to 100mm diameter) & Glass Reinforced Plastic / Epoxy (up to 100mm) Specification: Total Length : 150mm Tooth Spacing : 1.4mm / 18TPI
Bahco 80 Series Chrome Plated Finish Adjustable Wrenches with tapered jaws with a measurement scale on the fixed jaw. They have a 16º head angle with no protruding shank when fully open and a strong I section handle with a spring loaded square section, and a knurled adjusting nut.Overall length: 300mm (12 in).Jaw Capacity: 34mmWeight: 645g.Spare Adjustable Jaw BAH8073C-2 - Available to orderSpare Knurl Set: BAH8073C-95 - Available to order
The Fisco PJ100/9 Pacer GF Tape has a 13mm PVC overcoated fibreglass blade with graduations in metric only. The impact resistant ABS frame has a handy integral ground spike, plus a tough, high impact polymer centre with low friction bearing, which offers a smooth rewind action. It has a long winding lever and easy-grip knob that makes rewinding fast and effective. It also has a corrosion resistant end-piece. Made in Britain.
The ABUS KE60 Euro profile thumbturn cylinders are suitable for wooden, aluminium & most uPVC doors. They have precision, mushroom pin and paracentric keyway which offer comprehensive anti-pick protection, also they have a hardened steel anti-drill spring & pin protection with 8 anti-drill pins in every keyway. How to measure a Euro Profile Cylinder: A Distance from internal end of cylinder (Not the thumbturn) to centre of camB Distance from external end of cylinder to centre of cam Thumbturn Cylinders, Measurement K is always the thumbturn side of the cylinder, and the other measurement Z is external.
Forgefix Hex Flange Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The flange head acts as a fixed washer, distributing the load under the bolt head. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.Specifications: Size: M6 x 75mm.Pack quantity: 100.
The ABUS KE60 Euro profile thumbturn cylinders are suitable for wooden, aluminium & most uPVC doors. They have precision, mushroom pin and paracentric keyway which offer comprehensive anti-pick protection, also they have a hardened steel anti-drill spring & pin protection with 8 anti-drill pins in every keyway. How to measure a Euro Profile Cylinder: A Distance from internal end of cylinder (Not the thumbturn) to centre of camB Distance from external end of cylinder to centre of cam Thumbturn Cylinders, Measurement K is always the thumbturn side of the cylinder, and the other measurement Z is external.
