17 unids Brocas Set Martillo Eléctrico Broca Cincel Cortador de Agujero Taladrar Ranurado Herramientas con Caja de Plástico

The DMT D9 Diamond sharpening bench whetstone has non-slip feet and will not break, chip, crack, hollow or groove. The D6 whetstone is made from the hardest material which is one of the most efficient sharpening abrasive. Available in unique interrupted surface and continuous surface, light pressure produces a sharp edge with just a few strokes. Use water for lubrication no oil, smell or mess and can hone ALL hard materials: carbide, steel, etc. and is supplied with Non-skid mat. Precision, continuous monocrystalline diamond bench whetstones with rubber feet. The grit size is etched into the side of the whetstone. The grits are denoted by a dual coloured circle which is set into one end. Blue: Coarse Grade 325, 45 micron.Red: Fine Grade 600, 25 micron.Green: Extra Fine Grade 1200, 9 micron.Red: Fine 600g, 25 micron

These Forgefix Pozi Carcass Screws have an extremely coarse single thread. The have a black phosphate coating for increased durability and a self drill point for easy installation. APPLICATION:Designed specifically for chipboard and MDF (medium density fibre) board and carcass assembly. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Coarse thread screws have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Carcass Screw Pozi SCT Black Phosphate 4.2 x 45mm Box 200

Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact. Designed to drive nail heads below the surface of the wood.Point Diameter: 4.0mm (5/32in)Length: 100mm (4in)

The Einhell GH-PC 1535 TC Chainsaw is a robust but nevertheless handy petrol chainsaw which is suitable for universal use. It is ideal for felling, clearing of underbrush and debranching of trees. The ergonomic design of the handles and the anti-vibration system help to reduce fatigue. The GH-PC 1535 TC has electronic ignition which is resistant against dirt and humidity, as well as changes in temperatures. It allows easy starting and uninterrupted motor operation. The chain is easy to tension and change without the need for any tools. The chainsaw is made with high quality components, including a bar and chain from Oregon. For safety it features a chain brake and hand guard which stops the chain within a few milliseconds in case of kickback.

These Forgefix Set Screws are made from grade 8.8 steel and are zinc plated for increased resistance to corrosion. They are fully threaded and conform to DIN 933 standards.Can be used with many Nut types and washers. APPLICATION:For fastening together numerous types of material or to be fastened in to pre-tapped holes.Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.High Tensile Set Screw Zinc Plated M10 x 30 Bag 10

The Milwaukee PLH 20 SDS-Plus L Shape Hammer is a 2 mode drill - hammer drilling and rotary drilling - for maximum versatility. It has an SDS-plus chuck, with optimised hammer drilling at 5 – 12 mm. It has a forward and reverse mechanism. The PLH 20 features motor cooling airflow that is designed in a way that blows drilling debris away from the user when drilling overhead. A safety clutch protects user and machine if the drill bit jams. The drill has AVS (Anti-Vibration-System) to provide more comfortable use and less strain. The soft-grip handle and ergonomic 2-finger trigger with variable speed control increase the comfort further. Supplied in a kitbox. Specification Modes: Hammer Drilling, Rotary Drilling. Input Power: 620 Watt. No Load Speed: 0-2,700/min. Impact Rate: 0-4,400/bpm with 2.0 Joules. Capacity: Concrete: 20mm, Steel: 13mm, Wood: 30mm. Chuck: SDS-Plus. Cable Length: 4m. Weight: 1.9kg.