7 Inch Spot LED Work Light Bar Tri Row 3030 72W 6000K for Offroad 4WD SUV

Weather type
Summer
Lining
Mesh
Visibility
Side Eye Night Eye
Ventilation
Mesh panels
Protection
backprotector prepared protector shoulder & elbows
Other specs
Coat hanger Jeans loop
* "lighter picture" shows the night eye effect

Visior for following Shark helmets
Evoline Series 3 Evoline Evoline Pro Carbon
*example picture

100% Racecraft Extra Alta Motocross BrilleRacecraft steht für die Verpflichtung von 100%, eine verbesserte Benutzererfahrung zu schaffen, indem den Fahrern ein höheres Maß an Funktionalität und eine genauere Sichtweise geboten werden. Die Synthese aus Präzisionstechnik und minimalistischem Design führt zu einer erstklassigen Brille, die so gut funktioniert, wie sie aussieht.Eigenschaften:Abstützungen: Helfen perfektes Gleichgewicht zu erreichen. Abnehmbarer Nasenschutz: Die Befestigung des Nasenschutzes gewährleistet Stabilität und Schutz unter den meisten Testbedingungen. Schaum: Dreilagiger, feuchtigkeitsregulierender Schaum. Scheibe: Anti-Fog-beschichtete Polycarbonat-Scheibe für eine einwandfreie Sicht. Die Scheibenform ist für die gesamte Produktlinie gleich. Scheibenbefestigung: Das Rückhaltesystem aus insgesamgt 9-Pins gewährleistet einen sicheren Sitz der Scheibe. In der Branche ist es zudem das Scheibenbefestigungssystem mit der höchsten Anzahl an Rückhaltepunkten. Riemen: 45 mm breit, silikonbeschichteter Riemen verhindert Schlupf. Lufteinlässe: Die zum Patent angemeldete Technologie leitet Luft in den Schaumstoff ein und unterstützt so das Feuchtigkeitsmanagement. Spezifikationen:Filterkategorie: 2 Lichtdurchlässigkeit: 25% +/-5% Im Lieferumfang enthalten:1 x 100% Alta Motocross Brille 1 x Mikrofaserbeutel 1 x Nasenschutz 20 x Abreißfolien 1 x klare Linse - 100% Racecraft Extra Alta MX Motocross Brille

Feature:1.3200 PSI high pressure water gun body, brass fitting.2.Accessories of pressure washers, for cleaning the car, mechanical equipment, floors, walls, etc.Specification:NameSnow Foam Lance BottleMaterialReinforced nylon,Brass,PEHD(High Density Polyethylene)Capacity1L / 32ozSize300mm*85mm(Height * Diameter)Max. Pressure3200PSIMax.temperature60℃/140℉Nozzle MaterialBrassPackage Included:1 X NEW Snow Foam Lance Bottle1 X Adapter

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Upper material
full grain microfibre
Lined
lined with a water resistant material coupled with trockenfuss®
Sole
non slip rubber sole
Features
closure with 5 vintage style metal buckles arch area and front featuring a quilted padding pu reinforcement on the front gaiter closure on the calf area nylon inner sole with removable arch support pad