Sexy Deep V Printed Criss Cross Backless Bikini

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

This is Grex´s new full face road helmet based on Nolan´s N64 model, with which it shares much-appreciated technical characteristics. Compact design, ease of wear, rapid removal visor (ready for the Pinlock® fog-resistant inner visor), an efficient ventilation system, Microlock retention system with micrometric adjustment and good overall comfort make the G6.2 an interesting product for those looking for a full face road helmet with a competitive price and the Made in Nolan guarantee. For K-Sport models, additional Dark Green visor in the Box.

For the Klimate Glove, premium feel, durability and value are top priority. Re-engineered to hold 200 grams insulation securely on the back-of-hand and fingers (where cold attacks), 100 grams on palm and with a new ultra-tacky and durable palm material, the Klimate Glove brings true Klim® performance like never before. Features
Gore-Tex® guaranteed to keep you dry® 200 grams 3m™ thinsulate™ insulation on top of hand and fingers 100 grams 3m™ thinsulate™ insulation in palm Upgraded palm material increases grip and durability Entry assist pull-on loop Goggle squeegee

Santa Claus Wrist Strap

Features
Equiped with AFS system and 3D mesh lining for thermoregulation, it will be performant in summer and mid-seasons. Put in the specific removable lining and you’ll obtain a warm and waterproof garment for winter Thick removable polar thermal lining. An excellent protection against the cold that integrates a specific insert Internal Polymesh technical lining, waterresistan, breathable, light and pleasant to wear The back and chest feature an internal 3D honeycomb lining which improves the strength of the fabric, offers increased comfort and better thermoregulation in all weathers

strapazierfähiges Rindnappaleder anilin Innenhand aus Känguruleder Schoeller®-Keprotec®-Verstärkungen vorgekrümmte Finger Stretcheinsätze zwischen den Fingern und an den Seiten Sturzpads atmungsaktiv