249.G3 Sheathed Punch 3mm

Self-guided trimming bits. Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread wear of cutting edges D = 9.5 mmC = 12.7 mm

The Stanley medium pile Silver Stripe roller sleeve is ideal for use with emulsion and water-based paints. It has a long life, and provides an excellent all-round performance, coverage and finish. It is made from woven polyacrylic fabric and is suitable for smooth and semi-rough surfaces. Size: 230mm (9in).Pile height: 12mm.Diameter: 44mm (1.3/4in).

These Forgefix Set Screws are made from grade 8.8 steel and are zinc plated for increased resistance to corrosion. They are fully threaded and conform to DIN 933 standards.Can be used with many Nut types and washers. APPLICATION:For fastening together numerous types of material or to be fastened in to pre-tapped holes.Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.High Tensile Set Screw Zinc Plated M10 x 30 Bag 10

Stahlwille Series 2049 INHEX Extra Long Sockets have 3/8in square drives and are suitable for socket head/hex head screws. Made from chrome alloy steel and chrome plated. Manufactured to DIN 7422 standards. Metric sizes. MADE IN GERMANY.Stahlwille In-Hex Socket 3/8in Drive Xtra Long. Size: 6mm.Overall Length: 100mm (4 in).

50 piezas de 2x1 mm N45 grado disco de tierras raras redondo imán fuerte neodimio artesanía de hierro magnético

Monument Tap Reseating Tool 1/2 inch re-cuts the seats of worn taps or stopcocks without disconnection from the pipework.Tapered cones screw into the top of the tap body, provided the tap body is threaded to the top. For taps with recessed threads in the body, use the parallel bush series. Cutters are case hardened. The feedscrew allows fine adjustment to the cutter. All parts are interchangeable. Fits old series 1/2 in BS1010 flat seats. Complete with 17 and 19mm (11/16 in and 3/4 in ) flat cutters and a tapered cone.