Forgefix FORHTSS8100M High Tensile Set Screw ZP M8 x 100 Bag 10

Homebrew Kegging con bloqueo de bola Accesorio de cerveza Cargador de CO2 regulado Cerveza casera Herramienta de bebida de cerveza Válvula reductora de presión

This robust mains powered jigsaw is perfect for site or workshop use. The soft grip handles and anti-splintering device means that you can use the jigsaw for extended periods with minimal discomfort. The Makita 4350CT Orbital Action Jigsaw features a quick release, tool-less blade change enabling you to continue work with a minimum of disruption. Variable speed control and an adjustable, sturdy base increase accuracy and control when cutting. The double insulated cable and robust all-metal gearbox means that this jigsaw should give you years of problem-free use.

The Fisco PJ100/9 Pacer GF Tape has a 13mm PVC overcoated fibreglass blade with graduations in metric only. The impact resistant ABS frame has a handy integral ground spike, plus a tough, high impact polymer centre with low friction bearing, which offers a smooth rewind action. It has a long winding lever and easy-grip knob that makes rewinding fast and effective. It also has a corrosion resistant end-piece. Made in Britain.

The band clamp is suitable for assemblies made of wood, plastics and non-ferrous metals, but it can also be used with ferrous metals when firm all-round clamping which will not damage or distort the work is required. Because the tape is tightened evenly from both sides, pressure is uniformly distributed all round or at each corner, thereby preventing distortion on one side. Self locking occurs automatically as the strap is tightened. This ensures consistent tension, which is maintained until the strap is released. The Vario-angle adapt automatically and infinitely variably to any angle from 60° to 180° . Clamping Range Up to 7mBand Width & Depth 25mm x 1mm Angle 60 / 80 DegreesWeight: 0.53Kg

Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to ISO 9001. Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.Size 6XAdjustment . 120 - 150mmAdjustment. 4.3/4 - 5.7/8in

The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.